UGREEN CM403 Bluetooth Audio Receiver/Transmitter User Manual – Manuals

Bluetooth Audio Receiver/Transmitter Model: CM403 I P/N: 80893 User Manual

product overview

1. leo indicator
2. microphone jack
3. female usb-c: charging port
4. multifunction button: power on/off/play music /call management/factory reset/change language
5. 3.5mm male jack
6. slide switch: switch between rx and ‘ix’ modes

on/off

power on: When the power is off, long press the multi-function button for 3 seconds, the indicator lights blue for 1 second and turns off. power off: when power on, press and hold the multifunction button for 3 seconds, the indicator lights red for 1 second and turns off.

bluetooth receive mode

Voice prompt language switch In receiving mode, the voice prompts switch between Chinese and English. Details as follows: In the pairing mode (alternate red and blue flashing), short press the multifunction button three times. bluetooth connection

• slide the power button to “rx” position to enter bluetooth receiving mode.
• insert the product into the auxiliary port of bluetooth receiver (such as speaker) first, then press and hold the multifunction button for 3 seconds to power on and ready for pairing.
• enable bluetooth access on your phone, search for “ugreen-80893” and click to connect. the voice prompt of “fleflow7, eav (bluetooth connected)” indicates that the connection has been established.

Notice: In receiving mode, please insert the product into your car’s aux jack, and powered by the provided usb cable, the product will turn on automatically once you start your car.

double connectivity

• Firstly, follow the steps of “bluetooth connection” to connect the product to the phone, then turn off the bluetooth on the phone once connected.
• Secondly, connect the product to phone b bluetooth.
• Thirdly, turn on the phone’s bluetooth access, it will reconnect to the product automatically.
• Finally, both phone A and phone B are connected to the product simultaneously.

bluetooth transmission mode

bluetooth connection

• slide the power button to “dc” position to enter bluetooth transmission mode.
• insert the product into the bluetooth transmitter auxiliary port (such as a computer) first, then press and hold the multifunction button for 3 seconds to power on and ready for pairing.
• turn on your receiving devices (bluetooth headphones/speakers) to enter pairing mode.
• the product will automatically pair with and connect to your device.

double connectivity

In streaming mode, this product is able to connect to two bluetooth receivers and output audio simultaneously. classified as device a and device b, the operation steps are as follows:

• Please refer to the previous step “bluetooth connection” and connect the product to the device a.
• short press the multi-function button twice to enter the pairing mode, accompanied by a blue light flashing twice per second. reopen bluetooth on device b, the connection between the transmitter and device b will be established.
• play music to confirm both devices a/b have audio output.

notice:

• If both devices a/b have no audio output or only one has audio output, please restart the product to reconnect the two devices. if it fails again, please change the connection order of device a/b.
• the available distance between device a and device b is within sm.

notes

• Auto reconnect: This product will automatically connect to the last two paired devices the next time it is turned on.
• During connection, the available distance between this product and the bluetooth device is within 10m.
• If it fails repeatedly, please restart the product or bluetooth device.
• Pairing required: Short press the multi-function button twice.
• Reconnection required: In pairing mode, short press the multifunction button once to activate a command.
• Connection timeout: In pairing or reconnection mode, if the product is not connected to a bluetooth device, it will automatically turn off after 5 minutes.

function & operation (receive mode)

play/pause music playback: short press the multifunction button once. communication management answer/end a call: short press the multifunction button once. reject a call: press and hold the multifunction button for 2 seconds.

battery level & charge

• battery status: In receive mode, the battery level will be displayed in the status bar of your smartphone (not available on all smartphone models).
• low battery status: low battery indicates that the product has less than 10% charge. Please charge the product with the provided cable and a specified 5v/la power adapter.

indicators

factory reset

In power off mode, press and hold the multifunction button for 10 seconds, the indicator will be solid blue for 2.5 seconds, indicating a successful reset.

security notes

• This product has a built-in lithium battery. do not disassemble, crush or expose to fire.
• stop using if the battery is swollen.
• do not expose the product to excessive temperatures.
• stop using use it after soaking in water.

specifications

package content

important information about weee

This symbol on the products and/or accompanying documents indicates that, according to the new directive 2012/19/eu on waste electrical and electronic equipment (weee), used electrical and electronic equipment products (weee ) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise be caused by inappropriate waste handling. please contact your local authority for details of the nearest designated collection point. Penalties may apply for improper disposal of this waste, in accordance with your national legislation. for professional users in the european union if you wish to dispose of electrical and electronic equipment (eee), please contact your dealer or supplier for more information. For disposal in countries outside the European Union, this symbol is only valid in the European Union (EU). If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

warranty information

A 2-year limited warranty applies to all ugreen products purchased from ugreen official store or authorized sellers. feel free to contact us if you have any problems.

contact us

for amazon north america usa markets. us: [email protected] mx: [email protected] europe uk: [email protected]fcc statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Learn more about the EU Declaration of Conformity: https://www.ugreen.com/download/ FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Learn more about the EU Declaration of Conformity: https://www.ugreen.com/download/ RF warning statement: The device has been evaluated to meet general RF exposure requirements.IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” FCC ID:2AQ15-CM403 IC:26850-CM403 CAN ICES-003(B) / NMB-003(B)

documents / resources