How to Connect a DVD Player to a Smart TV - Virtuoso Central
Technology

How to Connect a DVD Player to a Smart TV – Virtuoso Central

Remember the days when to watch a movie you had to go to a video rental place to get the movie you wanted to watch or buy those movies on sale for $4.99? Well those days are over. Today, to watch a video, all you have to do is log in to your Netflix, Hulu, or Amazon Prime account to choose the movies or TV shows and start watching immediately without leaving your home.

But during those years, you ended up amassing a huge collection of DVDs and Blu-rays of your favorite movies and TV shows that are now part of your storage. Suddenly nostalgia kicks in and you remember all the limited collector’s edition DVD sets you own. you want to watch them, but you’re not sure if your smart tv is compatible with your old dvd player.

Reading: How to connect your dvd player

This post will show you how to connect a dvd player to a smart tv so you can watch your dvd collection. let’s get started.

check your dvd player to see what video connections you have.

before you do anything, be sure to check your dvd player to see what types of video connections it comes with. If you bought your DVD player not too long ago, it probably came with an HDMI output. If this is the case, follow these steps to connect it to your TV.

  1. connect one end of an hdmi cable to the back of the dvd player.
  2. connect the other end of the hdmi cable to an available input on your television.
  3. turn on the dvd player and using your tv remote select the appropriate input.
  4. at this point you should see the dvd player logo on your tv screen.

if you don’t have a dvd player and need one, be sure to buy one that comes with an hdmi video output, that way you can connect it directly to your smart tv.

In case you still have an older DVD player, but it doesn’t have an HDMI video output connection, check the back to see what type of connection is available.

See Also:  Getting started with LEGO Mario - Bricking Around

Most older dvd players have composite video output and component video output. use the image below to help you figure out what type of connection you have. After discovering the type of connection, continue reading to learn how to connect your DVD player to a smart TV.

See also: How to Set Up and Connect AirPods (2nd Generation) and AirPods Pro – MacRumors

You may be interested: how to convert vhs tapes to digital format

check if your smart TV has a component or composite video input

Most smart TVs up to 65″ still include a composite video input. If that’s the case, on the back of the TV you should see a yellow RCA connector, which is an analog video signal. It includes a stereo input signal for audio, which has white and red rca connectors, sometimes instead of rca connectors for audio connection, it uses 3.5mm stereo audio jack connector, the picture below is for your reference.

If your TV comes with composite video, follow these steps to connect your DVD player to your TV:

  1. connect the composite video cable (yellow rca) to the dvd player.
  2. then connect the white and red audio rca cables to the jacks on the back of the dvd player.
  3. take the other side of the composite cable and the audio cables and connect them to your TV.
  4. turn on the dvd player and select the channel on the tv.
  5. You should see the dvd player logo on the tv screen.

In some cases, the TV comes with component video input, which is also an analog video signal split into three separate signals. each signal is sent through a different rca cable, one green, one blue and one red.

This type of video connection provides better signal quality than composite video. the audio comes in as a separate signal. This is usually a white and red rca plug or a small 3.5mm audio jack. check the image below for your reference.

If your TV comes with component video, follow these steps to connect the DVD player to the TV:

  1. connect the component video cable (rca green, blue, red) to the dvd player.
  2. then connect the white and red audio rca cables to the corresponding connectors on the back of the dvd player.
  3. take the other side of the component video cable and audio cables and connect them to your tv.
  4. turn on the dvd player and select the channel input on the TV.
  5. at this point you should see the dvd player logo on the tv screen.
See Also:  How to Control a Light Bulb using Single Way or One-Way Switch?

note: if you need to buy a component video cable, make sure you also choose an rca-to-rca audio cable because you will need it to send the audio signal to the TV.

what if my smart tv doesn’t have a composite or component video input?

As time goes by, TV manufacturers are doing away with analog video connections, because as video resolution increases to 4k and 8k, it doesn’t make sense to degrade the video quality experience by using analog signals such as composite and component that can only -quality video. still, if you have a dvd collection and you want to watch it on your big screen, smart tv, you should be able to.

See also: How to connect a monitor to your laptop (Windows 10 and Mac) | Asurion

What you would need to convert the analog video signal to digital is a composite video to hdmi converter or component to hdmi converter (links to amazon). If your DVD player comes with both types of connections, I recommend using the Component to HDMI converter because it can output a 1080p HD video signal.

composite video can offer up to 704 × 480 (480i) resolution. you need a resolution of 1920 × 1080 (1080p) to get a decent video experience on your smart TV. what the converter does is increase the resolution to 1080p so that the video quality looks better.

Component video connections provide 480p, 576p, 720p and 1080p resolutions. that’s why it’s recommended to use component over composite because that way, the converter does a better job of scaling the video image. the result is better video quality.

See Also:  How to Connect Your Bone Conduction Wireless Bluetooth Headphones to Your iPhone? - Tech Evaluate

Please note that even if you get an enhanced 1080p video signal from the converter, the video quality may not be the best and should never be compared to current HD video formats. The reason is that the standard resolution of DVDs is 720×480 pixels for NTSC and 720×576 pixels for PAL in 4:3 or 16:9 aspect ratio.

Another thing to note is that these converters are only one-way converters, meaning they can go from analog to digital, but not the other way around.

Follow these steps to connect a dvd player to a smart tv using a component to hdmi converter. use the image below for reference.

  1. connect the component or composite video cables and audio cables (white and red rca) to the back of your dvd.
  2. take the other side of the cables, a total of 5, and plug them into the corresponding place on the video converter.
  3. Use an hdmi cable to connect the converter box to the TV.
  4. Make sure you plug the converter into the wall outlet current and turn it on. In some cases, the converter like the one we recommend in this post does not come with a power adapter; but it comes with a usb cable to power it. if your tv has a usb port that delivers power you can plug it in there, if not just use a recycled 5vdc power adapter from an old cell phone.
  5. turn on the dvd player and use the remote on your TV to select the correct input channel.
  6. At this point, you should see the DVD logo on the TV screen.

final thoughts

following the simple steps shown in this article will help you connect your dvd, xbox 360, ps2 or any other old device you have to your smart tv.

Make sure you have all the cables you need on hand, and if you don’t, you can use the links provided to buy them on amazon.

See also: How to Connect Jumper Cables | Dead Car Battery Tips | Rochester, MN

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button