Connecting Vest Edge to PS4/PS4 Pro : Support
Technology

Connecting Vest Edge to PS4/PS4 Pro : Support

there are several options to connect your ps4 to your woojer vest edge. choose the option that’s right for you, depending on your specific hardware and needs:

  • connecting woojer vest edge to ps4 usb output
  • connecting woojer vest edge to ps4 controller
  • connecting woojer vest edge to rear optical output (exists on certain models)
  • connect the brim of the woojer vest to the front usb port
  • connect the brim of the woojer vest to your TV

Note: Connecting your woojer vest edge to your TV using the TV’s internal bluetooth may cause significant delay and is therefore not recommended.

Reading: How to connect woojer to ps4

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

see the following sections to choose the connection type that’s right for you.

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

usb connection

for this type of connection you will need a usb type c to type a cable.note: if the audio signal coming out of the ps4 usb is not strong enough you should consider the others connection options.

  1. connect the type a end of the usb cable to the usb port on the ps4 console.
  2. connect the type c end of the usb cable to the type c input on the woojer vest edge.
  3. plug your headphones into the headphone jack on the woojer vest edge.
  4. go to your ps4 sound settings. make sure the output device is set correctly
  5. make sure the ps4 output volume is set to maximum.

Connecting Vest Edge to PS4/PS4 Pro : Support

wired connection, using dualshock controller

  1. Connect the rim of the woojer vest to the dualshock controller with the provided 3.5mm cable. one end to the controller’s output jack and the other to the woojer vest edge’s audio input jack.
  2. connect headphones to the woojer vest edge’s headphone jack.
  3. if desired use the ps4 in-voice chat channel, you need to connect your woojer vest edge to the dualshock controller using a trrs (4-pin) cable, like the one that came with your woojer vest edge.
See Also:  Wifi - RetroPie Docs

Connecting Vest Edge to PS4/PS4 Pro : Support

wired connection, using an hdmi audio extractor

  1. connect the hdmi output of your ps4 to an hdmi audio extractor.
  2. connect your tv to the hdmi audio extractor.
  3. connect your vest to the analog output from the extractor, using a 3.5 mm cable.
  4. connect the headphones to the headphone jack on the vest.

Connecting Vest Edge to PS4/PS4 Pro : Support

wired connection, using an optical audio cable (s/pdif) (for ps4 models with optical output)

  1. connect one end of the digital audio cable to an s/pdif (optical audio) port on the console.
  2. connect the other end of the cable to a digital optical port on analog converter.
  3. connect your woojer vest edge to the analog output of the converter, using a 3.5mm cable.
  4. connect your headphones to the headphone jack on the woojer vest edge.
  5. If you want to use the PS4 voice chat channel, please connect a 3.5mm dummy plug to the controller’s audio jack. then go to ps4 settings and configure input and output devices.

Connecting Vest Edge to PS4/PS4 Pro : Support

wireless connection, using a low latency bluetooth usb transmitter

  1. connect a low latency bluetooth transmitter to the ps4 usb port.
  2. pair your woojer vest edge with the bluetooth transmitter. see the transmitter manual for pairing instructions.
  3. connect your headphones: we recommend that you connect your wired headphones directly to the brim of your woojer vest. Alternatively, if your bluetooth transmitter is dual link, you can pair the woojer vest edge and your bluetooth headset at the same time.

See also: How to View Text Messages on ICloud From Any Device

Connecting Vest Edge to PS4/PS4 Pro : Support

See also: How to Install Polyethylene Culvert and Drain Pipe

See Also:  How to Connect an iPhone to a Boombox: A Detailed Guide | Stereo Boombox

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

Connecting Vest Edge to PS4/PS4 Pro : Support

note:

  • Dual link connections are not 100% reliable and you may experience poor audio quality when linking two receivers at the same time. that depends on the specific transmitter and receivers.
  • a dual link low latency connection can be established only if your headphones support low latency, just like the woojer vest edge. actual latency will always be dictated by the device with the highest latency.
  • you cannot establish a chat channel on the bill with this type of connection.

wireless connection, via optical audio cable (s/pdif) and low latency bluetooth transmitter (for ps4 models with optical output)

  1. connect one end of a digital audio cable to the s/pdif (optical audio) port on the console.
  2. connect the other end of the cable to a low latency port bluetooth transmitter.
  3. pair your woojer vest edge with the bluetooth transmitter.
  4. connecting your headphones: you can connect wired headphones directly to your woojer vest edge. Alternatively, if your Bluetooth transmitter is dual-link, you can pair the Woojer Vest Edge and your Bluetooth headset at the same time. You can also skip this step and use your TV’s speakers.
  5. If you want to use the PS4 voice chat channel, connect a 3.5mm dummy plug to the controller’s audio jack. then go to ps4 settings and configure input and output devices.

Connecting Vest Edge to PS4/PS4 Pro : Support

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

See Also:  How To Wire Multiple 12V Or 6V Batteries To An RV

Connecting Vest Edge to PS4/PS4 Pro : Support

note:

  • Dual link connections are not 100% reliable and you may experience poor audio quality when linking two receivers at the same time. that depends on the specific transmitter and receivers.
  • a dual link low latency connection can be established only if your headphones support low latency, just like the woojer vest edge. the actual latency will always be dictated by the device with the highest latency.

wireless headset with base station

You can connect wireless headphones and a woojer vest edge to a ps4 simultaneously only if your wireless headphones have an extra output port on its base station (eg astro a50 headphones, steelseries wireless pro). Please refer to our game consoles tab of the support portal, where all currently tested headsets will be listed.

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

here are some examples of low latency bluetooth transmitters:

bt-w2 creative usb bluetooth audio transceiver with aptx low latency

reiyin wt-04 aptx bluetooth 5.0 usb low latency audio transmitter

avantree dual-link transmitter, low latency, bluetooth 5.0 with optical input (s/pdif)

avantree oasis plus, low latency dual link bluetooth transmitter with optical (s/pdif) input (extended range)

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

See also: How to Install Polyethylene Culvert and Drain Pipe

See also: Establishing a Connection (The Java™ Tutorials > JDBC Database Access > JDBC Basics)

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button