How To Connect Two Umbrella Strollers Easy Guide | Baby Journey
do you have a set of twins? a double stroller would be a great convenience for parents with two babies. however, the only problem is that twin strollers can be quite expensive. And when your babies start to want to walk, having to wear a bulky double design can become a bit impractical.
connecting a set of twin strollers may be the ultimate trick here. Buying two twin strollers would not only be much cheaper, but you also have the option of taking them apart and using them separately as your children grow. Do you want to learn how to connect two umbrella strollers safely and efficiently? find how I did it here.
how to connect two umbrella strollers: a few words about safety
Before we dive into the actual DIY, I want to talk to you about safety. Of course, before they’re allowed to be on the shelves and in the display rooms of baby-supply retail stores, strollers must go through rigorous testing and testing to determine if they’re safe enough to use.
These strict inspections help protect consumers from defective and dangerous designs that could cause injury to users. therefore, any umbrella stroller you came across, no matter how slim or compact, would have had to pass these checks before it was allowed to be sold to the general consuming public.
You might be thinking: Linking two of these layouts shouldn’t make them any less secure, right? Unfortunately, that’s where many parents go wrong. Linking even the safest umbrella strollers can become dangerous, if you don’t do it the right way.
Now, before we delve into how to connect two umbrella strollers, I want you to consider a few points for the safety of your babies:
1. use only identical umbrella strollers
The first thing to remember when trying to link two umbrella strollers is that they cannot have different designs. Variations in the structure, size, and controls of two baby strollers can make it difficult to put them together correctly. if the frames don’t line up, you may not even be able to join them.
2. strictly follow the instructions
There is a way to connect two umbrella strollers using simple materials you can find around the house. but be sure to follow the instructions I will provide as strictly as possible. There is a reason I chose the materials I have listed, and that is because they are the safest options available. anything else could be dangerous for both you and your baby.
3. spend when you can
Some of the tips in this guide are meant to help parents with minimal funds find a way to hack a twin stroller. but if you have money to spare, I recommend you skip the DIY and jump right into buying a stroller connector kit.
These nifty gadgets are widely available and can be very affordable. so unless you’re really trying to pinch pennies, I urge you to spend as much time as you can.
4. test, test, test!
I can’t stress enough how important it is to test your DIY before letting your baby board. In addition to pushing it, you may also want to get a feel for how to control, maneuver, and use the stroller’s features once they’re attached.
One task most parents struggle with when using a twin stroller is making sharp turns. this is due to the substantial width of a double stroller. make sure you master it before tying your babies so you can make any possible corrections and adjustments before actual use.
how to join two strollers with umbrellas: the DIY route
The easiest way I’ve found to join two strollers together is with zip ties. these little plastic cables are very durable against wear and tear and are not likely to come apart too easily.
To use zip ties to connect two umbrella strollers, line up the strollers side by side. make sure there is no gap between any of the drives. then take several zip ties and wrap them around the metal pipe frames that are next to each other. pull hard and make sure they are as tight as possible.
Personally, I’ve found this tactic to be most effective when you use at least 30 bridles. fasten 10 well-spaced pieces, and then leave a gap of about 5 inches, then fasten another 10 pieces. do this until you have three sets of zip ties at 5-inch intervals.
once you’ve done that, you’ll want to make sure any extra tails are pointing backwards. then cut the length to prevent it from snagging on anything while using your strollers.
However, I want to point out that this zip tie method is only safe as long as your babies weigh less than 40 pounds together. I also highly recommend that you avoid any challenging terrain, steep inclines, or high speed pushing to avoid any kind of accident with this DIY method, as you are using search materials like tight cables, velcro straps, etc.
joining umbrella strollers with stroller connectors
There are many manufacturers that offer stroller connectors in different designs. These are often designed to offer rigid stability that is more suitable for parents with heavier babies.
The prince lionheart stroller connector, for example, was designed to help make pushing two strollers easier for one person. the connectors hook onto the tubes of your strollers and provide a solid structure for a stable link.
However, I want to point out that these connectors work best when used on numbers. having at least three pairs securing your two strollers together should make for a more reliable connection.
conclusion
There are things you can do to help make caring for a pair of babies easy, convenient, and safe. These two simple methods are great solutions for making your way to your own tandem stroller, but be sure to keep your baby’s safety your first priority!
By ensuring a stable and secure connection, you can ensure a fun and hassle-free time for you and your two precious little ones.
—
Last update on 2022-08-19 / Affiliate links / Images from Amazon Product Advertising API
