Can Compressor Tanks be connected in tandem? | Eastwood Blog

Can Compressor Tanks be connected in tandem? | Eastwood Blog

A question we get from customers is if they can attach their air tanks in tandem to get more air out of their tent. Many times this happens when a person has a small air compressor in their garage and wants to get a larger reserve of air before the compressor runs. in theory the idea could work where you could get twice as much air to use before having to wait for the compressor to refill, but it’s not always the magic answer. we decided to cover the details below.

Air Compressor Run Time: Connecting two or more air tanks together will give you more reserve air to use before the compressor runs, but it will also take longer to get up to pressure built in two tanks instead of one. this means the compressor will run longer, get hotter and possibly overload it. This is especially true if your compressor is a low cfm output compressor that already runs long enough to fill the tank it came with. if you’re just filling tires or using low cfm tools it might not be a big deal, but if you’re blowing up or using tools that use a lot of air and are well above the cfm of the compressor you’re going to have to wait twice as long for it to the compressor to catch up and can overload the compressor causing premature wear or failure.

Reading: How to connect two air compressors

See also: How to connect Bluetooth Headphones to PS4 –

If you are using a small or similar sized pancake compressor, we do not suggest bolting the air tanks together. Some fast recovery style compressors, such as scroll or rotary screw compressors, will respond better to connecting air tanks as many have a duty cycle close to 100% and will not drop their cfm while filling the tanks. These compressors are also more industrial and are meant to run longer and more frequently, so they won’t have a problem running longer and filling larger tanks. But again, make sure you’re not running tools that far exceed your compressor’s cfm ratings. we don’t suggest going much further than twice the size of the tank the compressor came with to be safe.

See Also:  Gemini GSYS-4000 Dual 12&34 Bluetooth Party System User Manual - Manuals

How to Connect Compressor Tanks to Each Other – If you’ve decided your compressor is up to the task of running a reserve tank, we suggest you make sure the tank you’re adding is in good condition and no major leaks. cracks or major rust that would make it unsafe. The easiest way to connect the second tank to your system is to disconnect the main air supply fitting on the compressor tank and run the line to the new tank connecting the two. then you can run your air hose from the new tank to power your shop or tools. Be sure to use Teflon tape or glue around all threaded connections and fittings to eliminate any air leaks.

See also: 5 Ways To Connect With Your Heritage | Western Union

We suggest scheduling your tank fill time before and after adding your second tank and reevaluating over time. If you start to see a big increase in fill times, your piston-driven compressor could be worn out or in need of a rebuild. Also note that longer run times can cause the compressor to put out hotter air than normal, which will draw more moisture into the air lines. it is recommended to add a good water separator or filtration system to remove moisture in the air tool.

from small to large eastwood offers a full line of air compressors to meet your needs. See our full line of compressor products here:

See also: Those close moments that make our hearts melt are what makes parenting worth all the sacrifices

See Also:  How to Fix Your Bose Bluetooth Headset Pairing Problems - Headphonesty

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button