Wireless network access | Information Technology at PCC
Technology

Wireless network access | Information Technology at PCC

android
  1. select the “pccwifi” network from the list of available wireless networks
  2. after connecting to the wireless network, a
    • username dialog will open: your username mypcc
    • password: your password mypcc
    • domain: pcc.edu
    • eap method: peap
    • phase authentication 2: none (in android latest device verification in advanced – mschapv2)
    • ca certificate: not specified or not validated
    • identity: your pcc username
    • anonymous identity: leave blank
    apple
    1. select the “pccwifi” network from the list of available wireless networks
    2. after connecting to the wireless network, a dialog will open
      • security: wpa2 enterprise
      • username: your mypcc username
      • password: your mypcc password
      • domain: pcc.edu
      chromobook
      1. select the “pccwifi” network from the list of available wireless networks
      2. after connecting to the wireless network, a dialog will open
        • ssid: pccwifi
        • eap method: peap
        • phase 2 authentication: mschapv2
        • server ca certificate: do not verify
        • user certificate: none installed
        • username: your mypcc username
        • password: your mypcc password
        • anonymous identity: (leave blank)
        • save identity & password (verify)
        windows 7 and earlier
        1. before you can log in, you must first download the certificate file
          • once downloaded, unzip and open the file
          • a dialog will appear asking you to make changes to your computer. select “yes”
          • a quick connect dialog will open to configure your system. select “next”
          • security: wpa2 enterprise
          • username: your mypcc username
          • password: your mypcc password
          windows 8
          1. select the “pccwifi” network from the list of available wireless networks
          2. click “connect”
          3. fill in the following information
            • name username: your mypcc username
            • password: your mypcc password
            windows 10
            1. access your network settings by clicking the notification box in the lower right corner or click the wi-fi logo with the * in the logo, if present

              click on the network

              Reading: How to connect to pcc wifi

              select pccwifi and click “connect”

              See also: How to anchor post to concrete | HowToSpecialist – How to Build, Step by Step DIY Plans

              fill in the following information:

              username: your mypcc username

              password: your mypcc password

              See also: Can You Plug a Fire TV Stick Into the Receiver? – eDevice Technologies

              click “connect”

              linux

              The hardest part about accessing the pccwifi service from linux (including android) is that the configuration interface can vary a lot. these settings are general and neutral to the interface. depending on the client (“requester”), when it first interacts with the access point, it may complete some of the necessary configuration. again, this can vary. anything required that is not autocompleted must be added by hand.

              here are the settings; they may not appear in this order.

              1. security mode should be “wpa/wpa2 enterprise” – client may display it differently, but it should look like this.
              2. authentication method is protected eap (peap) .
              3. anonymous identity can be left blank or unchanged.
              4. if there is a “domain” field, then it should be set to “pcc.edu”. this is perhaps the easiest setting to get wrong or bypass, and some clients won’t work without it.
              5. the peap version should be “auto”.
              6. the internal authentication method should be ​​“mschapv2”.
              7. username is your mypcc username.
              8. password is your mypcc password.
              google pixel 2
              1. eap method: peap
              2. phase 2 authentication: none
              3. ca certificate: system certificate
              4. domain: pcc.edu
              5. identity: your pcc username
              6. anonymous identity: leave blank
              7. password: your mypcc password

              See also: Vox amPlug AC30 Review – Guitar Gear Finder

              See Also:  How To Connect Jabra Headphones To Your Device? - Here One

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button