MERKURY Smart Wi-fi Camera User Guide - Manuals

MERKURY Smart Wi-fi Camera User Guide – Manuals

merkury smart wifi camera

MERKURY Smart Wi fi CameraMERKURY Smart Wi-fi Camera

thank you for purchasing your mercury smart home product.get started with your new devices by downloading geeni, a convenient app that manages everything right from your phone or tablet. Easily connect to your home Wi-Fi network and control multiple devices with the touch of your fingertips.

Reading: How to connect to merkury camera

startup guide

what’s in the box

MERKURY Smart Wi fi Camera - What’s in the Box

get ready

Make sure your mobile Know your Wi-Fi network and password Make sure your mobile device is running iOS® 9 or higher or Android™ 5.0 or higher MERKURY Smart Wi fi Camera - network and password Make sure you’re connecting to a 2.4GHz Wi-Fi network.(Geeni can’t connect to 5GHz networks) a microSD card can be used to save recorded footage but is not required

  • download geeni app from app store or google play.

Download the Geeni

  • register an account on your geeni app.
  1. Enter your mobile phone number or email addressCamera - Register an account
  2. Enter the verification code and create a password.MERKURY Smart Wi fi Camera - Enter the verification
  3. Log in to the App.MERKURY Smart Wi fi Camera - Log in to the App
step 2
  • connect the camera to a power source with the included usb cable. the indicator will stay solid red when it starts up, but will start blinking red when connected. if it doesn’t flash, reset it. *see pg. 4

MERKURY Smart Wi fi Camera - The indicator willMERKURY Smart Wi fi Camera - reset instructions

step 3
  • add device:easy mode
  1. In the Geeni app, on the top corner of the Devices screen, click Choose “Wi-Fi Camera”.MERKURY Smart Wi fi Camera - Easy Mode
  2. Make sure the light on the camera is blinking red, indicating the device is ready to connect, then press Next Step.MERKURY Smart Wi fi Camera - light on
  3. Enter your Wi-Fi network and password.MERKURY Smart Wi fi Camera - password
  4. The Geeni app will attempt to connect.This may take a few moments. When the blinking light turns solid blue, the connection was successful!NOTE: Geeni can’t connect to 5GHz networks.*If the connection fails, try to connect using QR Mode.

MERKURY Smart Wi fi Camera - Geeni app will

  • add device: qr code mode
  1. Be sure to reset the camera by pressing the reset button for 3-4 seconds.MERKURY - QR Code Mode
  2. In the Geeni app, on the top corner of the Devices screen, click + Choose “Wi-Fi Camera” Choose “QR Code” in the top corner.
  3. Click Next and enter your Wi-Fi details.MERKURY Smart Wi fi Camera - corner of the Devices
  4. Scan the QR code with the camera. When you hear the camera beep, select ‘I heard the beep’ and it will add your camera.MERKURY Camera - Scan the QR code with
  5. The indicator light will turn solid blue when the device was connected successfully!NOTE: Geeni can’t connect to 5GHz networks.MERKURY Smart Wi fi Camera - light will

*how do I reset the device and what does the flashing light mean?reset the camera by pressing the reset button for 3-4 seconds.

See also: How to set up wireless Apple CarPlay | Tom’s Guide

MERKURY Smart Wi fi Camera - does the blinking


  • Access Camera Settings:From your main device list, click on the camera you want to edit, then press the “ ••• “ button on the top right for advanced settings.
  • Device Name:Press to rename your device to something like “Bedroom” or “Kids’ Room”.MERKURY Camera -Press to rename your
  • Device Sharing:let friends, spouses, roommates, or family keep an eye on what your cameras see. Whether it’s a baby’s crib or the family dog, you can decide who gets to check-in, access the camera, and set notifications.MERKURY Camera - let friends, spouse
  • Remove Device:Delete the camera from your account. Until it’s deleted, it will always be linked to your account.
  • Indicator Light:By default, the camera lights up to show it’s on. Switch “Indicator Light” off to hide the light.
  • Flip:If you mount your camera upside down, toggling the “Flip” function will rotate the image so that it’s right side up.MERKURY Smart Wi fi Camera - mount your camera
  • Time Watermark:Turn the time watermark on to always see a timestamp of when the video is taking place.
  • Motion Detection:When turned on, you’ll receive notifications to your phone whenever the camera senses motion.Press to turn Motion Detection off or set how sensitive you want it to be.MERKURY Camera - time watermark
  • Format SD Card:Press to erase your Micro SD Card.
See Also:  How to Send Text Messages from Your Chromebook

frequently asked questions

  • can I share with family and friends?yes! you can share access to all merkury devices (cameras, plugs, light bulbs, doorbells, etc.) with family & friends. In the geeni app, press the “profile” button and click “device sharing” to grant or revoke sharing permissions. to share, the other user must have already downloaded the geeni app and registered an account.
  • recording and micro sd card use:no micro sd card (optional, sold separately) separately), the smart wi-fi camera can display live camera videos, save screenshots or camera feed videos to your phone for later, and record motion alert snapshots when notifications are on. Installing a micro SD card will further enable video recording and playback from your phone. When the card is installed, the camera will continuously record and play video on your phone until the card is full (up to 128GB supported). the video is encrypted and can only be viewed through the geeni app on your phone, so please do not try to remove the microsd card to view the video.
  • how much video can the camera record? Depending on video quality, the camera will use about 1GB of storage per day, so a 32GB card can provide weeks of continuous video. as the card fills up, the oldest footage will automatically be replaced with new video, so you never have to worry about running out of storage space.
  • how many devices can i control ?the geeni app can control an unlimited number of devices in an unlimited number of locations. your router may have a limit on how many devices can connect to one router.
  • my merkury device has a funny name. how do i rename it?from your main list of devices, click on one of the devices whose name you want to rename, press the “•••” button on the top right to access the advanced settings and click modify device name (or modify group name, if applicable). then you can choose a more familiar name.
  • what is the wireless range?the range of your home wi-fi network largely depends on your home router and of the conditions. of the room. check your router specs for exact range data.
  • if my wi-fi/internet goes down, will geeni still work?merkury products must be connected to wi-fi on to use them remotely


  • cannot connect to your wi-fi network.make sure you entered the correct wi-fi password during wi-fi setup. check if there is any internet connection problem. if the wi-fi signal is too weak, please restart your wi-fi router and try again.
See Also:  How To Connect An Audio Mixer To OBS - Digital And Analog -

reset device

  • The camera can be reset by holding down the reset button for 3-4 seconds.

system requirements

  • mobile device running ios® 9 or higher or android™ 5.0 or higher
  • existing Wi-Fi network

technical specifications

  • camera: up to 1080p (1920 x 1080) at 25 frames/sec. h.264 encoding
  • field of view: 115° diagonal
  • audio: internal speaker and microphone
  • storage: supports microsd card up to 128 gb (not included)
  • wi-fi is not compatible with 5 ghz wifi networks.

voice control guide

thank you for purchasing your mercury smart home product. Make sure your devices are already set up with the geeni app, then follow these steps. your video device can stream video to these leading smart assistants.

name and control of each device by voice

to control your mercury smart home products, just say “ok google” or “hey google” and ask. Make sure your devices are already set up with the geeni app.

MERKURY Smart Wi fi Camera - MERKURY

things you can say*: transmit to:

MERKURY Smart Wi fi Camera - Things you can say Google Home Hub, Google Assistant Smart Displays, Google Nest Hub, and any Google Chromecast-enabled TV, screen, or PC

*Some commands require compatible devices.

  1. Open the Google Home app and go to Home Control in the menu.MERKURY Smart Wi fi Camera - Open the Google
  2. Tap the “+“ button.MERKURY Smart Wi fi Camera - button
  3. Choose “Geeni“ from the list of Home Control partners.MERKURY Smart Wi fi Camera - Choose
  4. Authorize your account with Google Assistant using the username and password from your Geeni app.MERKURY Smart Wi fi Camera - Google Assistant

now your google home app and mercury devices are linked! now you can say “ok google” and control your mercury devices.

  • at any time, access the “home control” section of the google home app to set nicknames and rooms for your devices. you can rename your devices in the geeni app, and google assistant will refer to them by the same if you rename a camera to “living room camera ” or “baby room”, then google assistant will use that same name later. You can always give it a nickname using the Google Home app too. google assistant will be able to control devices by room.

See also: How to Get Your Printer Online If Its Showing Offline

To control your Merkury Smart Wi-Fi Camera home products, just ask Alexa. Make sure your devices are already set up with the geeni app.


things you can say*: transmit to:

MERKURY Smart - Things To control your MERCURY smart home products, just ask Alexa.Make sure your devices are already set up using the Geeni app.

*Some commands require compatible devices.

  1. Open the Alexa app and go to Skills in the menu.MERKURY Smart- Open the Alexa
  2. Search for Geeni then tap Enable.MERKURY Smart Wi fi Camera - Search for GeeniMERKURY Smart Wi fi Camera - Enable
  3. Authorize your account with Smart Home Skills using the username and password from your Geeni app.MERKURY Smart Wifi- account with
  4. Choose “Discover Devices.“ After a few seconds, your MERKURY Smart Wi-fi Camera devices will be displayed under Smart Home in the Alexa app.MERKURY Smart Wi fi Camera - Discover
  • you can rename your devices in the geeni app, and alexa will refer to them by the same if you rename a smart light bulb to “living room living room” or a nickname such as a smart camera to “living room camera” or “baby room”,
See Also:  How To Repair A PlayStation 5 HDMI Port | 1 Best Repair Shop

Alternatively, you can create an alexa group, such as “bedroom” or “downstairs” and add the device to the group.alexa will recognize the group name in the alexa app, or the device name in the geeni app. more information is available at:

fcc notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • reorient or relocate the receiving antenna.
  • increase the separation between the equipment and receiver.
  • connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/tv technician for help.

Caution: Any changes or modifications to this device not expressly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. requirements the device can be used in portable exposure conditions without restrictions.

Support: If you have any issues, please contact us at for assistance. (888) 232-3143 toll free to browse our full selection of products, visit us at:© 2020 merkury innovations • 45 broadway 3rd fl, new york ny 10006. product illustrated and specifications may differ slightly from those supplied. geeni is a trademark of merkury innovations llc. iPhone, Apple, and the Apple logo are trademarks of Apple Inc., registered in the US. uu. and other countries. App Store is a service mark of Apple Inc. Google, Google Play and related marks and logos are trademarks of Google LLC. iOS is a US registered trademark of Cisco. uu. and other countries and is used under license. amazon, alexa and all related logos are trademarks of, inc. or its affiliates. all other trademarks and trade names are the property of their respective owners.

See also: Arabic Joining Letters

frequently asked questions

documents / resources MERKURY Smart Wi-fi Camera [pdf] User GuideMERKURY, Smart, Wi-fi, Camera


  • geeni smart home | smart home security cameras, led light bulbs & more
  • build a group of smart home devices: amazon customer service
  • spend less. smile more.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button