[SOLVED] Drones WIFI Wont Connect To Mobile Phone & Controller - Hobby Henry
Technology

[SOLVED] Drones WIFI Wont Connect To Mobile Phone & Controller – Hobby Henry

You are preparing your drone to fly with your mobile phone, but for some reason, your drone’s Wi-Fi doesn’t seem to connect to your mobile device. frustrating huh? tried a bunch of “workarounds”, this is what worked for me.

If your drone’s Wi-Fi is not connecting to your mobile phone, please try to reset your drone’s Wi-Fi. do this on the dji by holding down the power button for 9 seconds until you hear three beeps. Wi-Fi should restart, then the two front lights on the drone will turn green. Now try to reconnect with your phone.

Reading: How to connect to drone wifi

restoring your drones wifi should work for most drones. however, there are many other reasons that could be causing this connection problem. here is a list of general troubleshooting tips you can try that are pretty quick and will work for most types of drones.

I recommend reviewing these before trying anything else.

troubleshooting tips for drone wifi connection to try first:

Usually, when your drone’s Wi-Fi doesn’t connect, it’s relatively easy to figure out what happened because all of these connection issues are closely related. here are some of the most common troubleshooting tips that should resolve your connection problem as soon as possible.

  • Delete and reinstall the drone app on your phone. Often when your mobile phone gets updated, it might affect your apps permissions.
  • Try connecting with a different phone. This is a quick way to tell if it’s a problem with your drone or your phone.
  • try to use an ipad. I have read cases where an ipad can pick up higher end wifi frequencies compared to your mobile phone. If this works, it is likely that your phone is not compatible with the drones wifi frequency.
  • You can try to reset the drones wifi. If all of the above fails, it could be a problem with the drones Wi-Fi. the best first step is to try to reset it. I have presented details on this in the rest of the article.
  • bypass wifi by connecting your phone to the controller with the provided usb. if possible, some drones do not allow you to connect your mobile phone to the controller with a usb. but if you have that option, give it a try!
  • check if your drones wifi disconnects during a crash landing. during crash landings your drones wifi might have disconnected . I have seen this problem with the promark p70 drone, where the camera containing the wifi would disconnect.
See Also:  How To Solder Copper Pipes

If these general tips didn’t work, the problem is probably a common drone-specific connection issue due to faulty manufacturing or something. I compiled a list of all the most popular connection problems that I could find on the web. keep reading!

dji spark drone

Issue: Drone Wifi connects to the controller but not to the smartphone.

See also: Bitcoin Mining Setup on Slush Pool ★ | Slush Pool

When you have this issue, you may see the drone controller wifi appear in your smartphone wifi connection settings; however, the wifi of the actual drone will be nowhere to be seen. If this sounds familiar, try these steps to get drone Wi-Fi back on your phone.

  1. The first step is to open the dji go app.
  2. Tap the “need help” text at the bottom left of the app’s home screen to the left of “enter device “.
  3. once you tap, a new screen will open and show you how to connect your phone to the drones wifi.
  4. tap the blue button below that says “reset airplane wifi settings.”
  5. the app will give you four steps on how to reset the drones wifi.follow those steps.
  6. now you should be able to go back to your phone’s wifi settings and it should show the drone.

If you can’t find the four steps on how to reset drone Wi-Fi settings, I’ll explain them here.

Here’s how to reset dji wifi settings:

  1. first, you need to press and hold the power button for 9 seconds. You’ll know you did it right when you hear a beep three times.
  2. The drone will go through its reboot process. it will switch to mobile device control and change its frequency to 2.4ghz.
  3. once your drone starts flashing green, that means the drone wifi has been reset successfully.
  4. open mobile wifi settings and your drone name should now appear.
See Also:  How to Connect Any Bluetooth Headphones to Xbox One - Headphonesty

promark p70 drone

Problem: The drone’s Wi-Fi connects to the controller but not to the smartphone.

on your phone in wifi settings, it doesn’t show any wifi devices. so there’s nothing to even try to connect to.

The Wi-Fi connection comes from inside the camera. If the camera is lit red, it means you have a faulty camera. There are a few ways around this.

Solution 01: The camera might have been disconnected during landing. this is the best case scenario because all you have to do is plug it back in.

  • To fix this, start by removing the camera from the drone.
  • Once you’ve done that, there are two plug connections that are white.
  • Make sure they are plugged in.
  • if they are unplugged, plug them in and try to connect to your drone’s Wi-Fi again.

See also: Splicing Right: How to Join PVC Pipe

Solution 02: If that doesn’t work, you’ll need a new camera for your promark p70 drone. promark is known to have excellent customer service, so give them a call and they might just send you a new camera for free. if not, they can at least point you in the right direction on how to get one.

If you want to call them, their customer service number is 855-782-3776.

anafi parrot drone

Issue: The drone won’t connect to the mobile phone or the controller.

Solution 01: The first thing you should try is to reset the Anafi Wi-Fi. This process will not reset your drone to factory settings, but it will ensure that it is fully up to date. You can do this by following the steps below.

  1. First, turn on your drone.
  2. Press and hold the power button for 8 seconds. the red lights will start to flash one after another. once all 4 lights are on, it is safe to release the button.
  3. the drone wifi will restart. on reboot it will also create a txt file on the microsd that will have the drones wifi password.
See Also:  How To Connect LG Washers To WiFi? 6 Best Reasons To Opt To Smart Washing! - Krostrade

If that doesn’t work, there’s another solution you can try.

solution 02: this solution was published by the parrots themselves. just be sure to back up any media. this solution will permanently keep all files including media in freeflight 6 that have not been backed up. so make sure you back up anything you want to keep!

  1. Let’s jump right into the second anafi connection solution.
  2. First, you’ll need to turn off your drone, close your skycontroller, and disconnect the controller from your mobile phone.
  3. li >
  4. Next, you will need to restart your phone and switch it to airplane mode. make sure bluetooth and wifi are turned off.
  5. you will now need to set up your drone as you normally do before a flight.
  6. but this time use a different cable when connecting the skycontroller 3 to your mobile device.
  7. If the freeflight 6 app starts automatically after doing the above, it means that the connection between the freeflight 6 app on your mobile device and skycontroller 3 has been re-established.
  8. if using a different cable fails, try removing the freeflight 6 app and reinstall it. an update on your phone might have interfered with app permissions. Importantly, this step will remove any media you have that is not backed up.

If it still doesn’t work after trying the steps above, try using another mobile phone or even an ipad. if nothing, the problem probably runs a little deeper. I recommend that you contact support as this probably means your skycontroller 3 is damaged.

See also: TV Fix Caster – Your Screencast Device in 2020

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button