Tzumi SoundMates Wireless Stereo In-Ear Earbuds User Manual - Manuals
Technology

Tzumi SoundMates Wireless Stereo In-Ear Earbuds User Manual – Manuals

user manual

Tzumi SoundMates Wireless Stereo In-Ear Earbuds

tzumi soundmates wireless stereo in-ear headphones

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

quick connect

to connect: sound partners are pre-paired with each other; the right earbud has the main default setting.

first: Press and hold the multifunction button on both earbuds until you hear the message “power on”. then you will hear “pairing” message. you will hear 2 chimes* indicating that both earbuds are ready to pair.

second: Select ‘tzumi soundmates’ in your device’s bluetooth display list.

third: You’ll hear “device connected,” indicating that your audio partners are now ready to use.

hmm… soundmates don’t pair with each other?

*if your audio partners don’t pair with each other, they will need to be reset. Long press the multifunction button on both earbuds until the LEDs flash red and blue alternately. choose a headset to designate as primary and press its button twice. the led of that headset will flash and the other led will remain fixed. you’re ready to go!

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

headset features

See also: How to Connect a Sound Bar to a Computer

FIG 1 EARBUD FUNCTIONS

Note: To change the main sound partner, press and hold the multifunction button on both earbuds. When the lights start flashing blue and red or you hear 2 chimes, quickly press the multifunction button twice on the earbud you want to be the primary.

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

pairing instructions

make sure the bluetooth function is available on your device. Specific pairing procedures will be different depending on different smart devices. For detailed information, please refer to your device’s user guide.

See Also:  Can I Connect an HDMI Laptop To a DisplayPort Monitor? - Pointer Clicker

If no bluetooth connection is made within 5 minutes after the headset is turned on, the headset will automatically turn off to save power. After successful pairing, the devices will memorize each other. therefore, pairing will not be necessary the next time you connect.

  1. Keep the distance between the device and your sound partners within 3 feet (only for pairing).
  2. Press and hold the multi-function button on both earbuds until you hear the prompt “turn on “. then you will hear “pairing” message. you will hear 2 chimes to indicate that both earbuds are ready for pairing.
  3. turn on the bluetooth function of the pairing device and select “tzumi soundmates” from the list of devices displayed.
  4. you will hear “device connected”. your headphones are now paired.

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

load soundmates & case

Place the soundmates in the case, they will automatically charge through the magnetic base. the led will turn solid red while charging. once it is fully charged, the led will turn off.

Plug the micro-usb cable into the bottom of the case to charge. The LEDs will flash red while charging and turn solid red when charging is complete.

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

important protections

  • do not use this unit for anything other than its intended use.
  • keep the unit away from sources of heat, direct sunlight, moisture, water or any other liquids.
  • do not expose the device to extremely high or low temperatures as this may damage the battery.
  • do not operate the unit if it has been wet or damp to avoid electric shock and/or injury to yourself yourself and damage the unit.
  • Do not use the unit if it has been dropped or damaged in any way.
  • Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may put the user at serious risk.
  • Keep the unit out of the reach of children. this unit is not a toy.
See Also:  One AirPod Not Working: Problems and Fixes - Headphonesty

Battery Disposal: This product contains a lithium polymer battery. lithium polymer batteries are safe for the environment when fully discharged. check your state and local laws for battery disposal procedures.

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

specifications

  • bluetooth version: bluetooth 4.2
  • charging time: up to 2 hours
  • playing time: up to 2.5 hours
  • battery of the case: polymer lithium 500 mah

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • reorient or relocate the receiving antenna.
  • increase the separation between the equipment and receiver.
  • connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/tv technician for help.
See Also:  What Is Uniswap and How Does It Work? | Binance Academy

tzumi soundmates item no. 5762 b distributed by tzumi inc. ny, ny, 10016. © copyright 2018 tzumi. All rights reserved. made in China. all brands are registered trademarks of their respective companies.

fcc id: 2a0n7-5761

See also: How To Enable Motherboard HDMI?

Reading: How to connect soundmates to iphone

read more about this manual & download pdf:

tzumi soundmates wireless stereo in-ear headphones user manual – download [optimized] tzumi soundmates wireless stereo in-ear headphones user manual – download

questions about your manual? post in the comments!

See also: How to Connect Your Android Device to a Projector

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button