How to Sync a Wii Remote to a Wii or Wii U
Technology

How to Sync a Wii Remote to a Wii or Wii U

  • you can sync a wii remote with a wii or wii u console by pressing the sync button on both the remote and the console.
  • you will need to sync each wii remote separately before using them.
  • if your wii remote won’t sync, make sure your batteries aren’t low and try closing any games that are currently open.
  • visit the wii tech reference library insider for more stories.

Before you start playing on your Nintendo Wii or Wii U, you’ll need to pair your Wii Remote with your console. If you’ve paired a headset with your phone via bluetooth before, then you’re probably familiar with the general steps.

here’s how to sync a wii remote with a wii or wii u, and what to do if they don’t connect.

Reading: How to connect new wii remotes

how to sync your wii remote with a wii

1. turn on your wii and open the sd card cover on the front of the console to find the sync button. it’s a dark red square.

2. take the wii remote you want to sync and remove the battery cover to find the sync button, a small red button below the batteries.

note: if you have one of the special wii remotes with a hole in the battery cover and a tool in the wrist strap to press the sync button, you can skip this step.

3. press and release the sync button on the wii remote. the four lights on the front of the wii remote will blink.

See also: How to connect Govee Lights together – The Smart Home Secrets

See Also:  Enable NTP and Configure NTP Servers

4. while the lights on the wii remote are still flashing, press and release the sync button on the wii console.

5. When all four lights on the Wii Remote stop flashing and one light stays on (indicating the player number, one through four), you have successfully paired the remote.

Repeat these steps for any additional Wii Remotes. You can pair up to four Wii Remotes to one console at a time.

how to sync your wii remote with a wii u

1. with your wii u powered on, take the wii remote you want to sync and remove the battery cover to find the small red sync button. if you have a wii remote with a hole in the battery cover that leads to the sync button, you can use it.

2. press and hold the sync button located on the front of the wii console for a few seconds until the sync menu appears on the screen.

3. press the sync button on the wii remote. All four lights on the front of the remote will begin to flash, and once it’s paired with the console, only one will stay on. will also appear on the screen in frame 1.

Repeat these steps for any other controllers you want to link. You can sync up to four Wii Remotes to one Wii U, but only one gamepad can be connected at a time.

how to sync your wii remote with a computer

See also: How to connect an iPad or iPhone to a TV | Tech Advisor

Your Wii remotes and consoles connect using a bluetooth connection. this means that wii remotes can be connected to other devices, such as computers.

See Also:  How to Hang Christmas Tree Lights - Best Ways to Hang Christmas Lights

if you want to connect your wii remote to your computer, to use it with the dolphin emulator for example, here’s what to do.

1. open the control panel and select add a device.

2. when your computer starts looking for devices to connect to, press the sync button on the back of your wii remote.

3. An option will appear in the list of devices labeled nintendo rvl and a series of letters and numbers. click here and then click next.

4. You will be prompted for an access code. just click next without entering one.

your wii remote is now connected to your pc.

wii remote connection troubleshooting

If your Wii Remote isn’t syncing properly, or if it syncs but the cursor doesn’t appear on the screen, there are a few possible solutions.

See also: How do I log in to my NETGEAR home router? | Answer | NETGEAR Support

  • Close any games or applications running on your console before syncing. you’ll want to be on the home screen.
  • check the wii remote’s batteries. If the lights don’t flash when you press a button, it’s time to change them. the wii remote uses two aa batteries.
  • reset your wii or wii u by removing the power cord from the console and waiting about 20 seconds, then plugging it back in.
  • If the remote syncs but there is no cursor on the screen, make sure the sensor bar is plugged in, unobstructed, and positioned correctly above or below the screen. you can go to your wii or wii u settings to see where it should be placed.
See Also:  How to Activate Tubi on your Smart TV: Easy Guide - Robot Powered Home

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button