How To Connect Jlab Earbuds & Headphones To iPhone – Decortweaks

17 August, 2022

0 33 3 minutes read

You are reading: How To Connect Jlab Earbuds & Headphones To iPhone – Decortweaks at Technology sharing page | Samsungliving.com

How to connect jlab to iphone

One of the awesome things about Jlab earbuds and headphones is that they are designed to be easy to connect up to your iPhone. On this page, we are going to teach you exactly how to do that. It will save you from having to thumb through the Jlab manual. This information is also up to date based upon the latest version of iOS.

so how do jlab headphones connect? headphones for iphone?

to connect your jlab device to your iphone, you will need to press the buttons on each of the headphones or earphones. when they flash, you just need to trace the bluetooth settings on your phone and select the earphones. then they will be fully connected.

Of course, not everything about connecting JLab headphones and earphones to your iPhone can be summed up in a few words. therefore, we thought the best route to take would be to tell you how it all works, step by step.

step 1: charge your jlab headphones or earphones

It is important that your headphones or earphones are nearly fully charged before attempting to connect them to iPhone. This is because it can be difficult to form that bluetooth connection if the device isn’t pumping enough power.

step 2: press the pairing button on your headphones or earphones

The headphones will have two pairing buttons. there will be one in each cocoon.

Turn on the headset and keep your fingers on the pairing buttons for about 10 seconds. the left earphone will turn white. the right earbud will flash blue and white.

headphones will have a single pairing button. press and hold your finger on this. will flash red and blue when the headphones are ready to pair.

step 3: connect to your iphone

The next step is the same whether you have headphones or earphones.

you will want to open the ‘settings’ app on your iphone.

look for the bluetooth list on this page.

If you haven’t turned on bluetooth pairing, make sure to turn it on now. there will be a small slider, and as soon as you activate this setting, a few more settings will appear.

if your devices are in pairing mode, they should be listed on this page (give iphone a few seconds to search for them). you just need to tap on the device name. you will be prompted to tap a pin number. this number can be found on the package of the jlab headphones or earphones.

In the rare event that your device is not listed, there will be another option that says “other devices” on this page. tap this and the headphones should appear.

You’ll know if the headphones and earphones have connected because the light on them will turn solid.

step 4 – test jlab earphones or headphones

now the last thing you need to do is check that everything works perfectly. Fortunately, this shouldn’t be too difficult.

To test that the real headphone part works, then load your favorite music app. you should hear a sound through the headphones. this part is simple.

If you want to test that the microphone is working, you will need to load a sound recording application. just record your voice. make sure the phone is not too close to you when recording. this way you can verify that the headset is being recorded, not an extra sensitive microphone on the phone. play the recording and you will know if the headset microphone is working.

step 5: what if it doesn’t sync?

If you can’t connect your jlab headphones or earphones to your iphone, then there could be a couple of issues. While it would be impossible to cover absolutely everything that could cause this issue, we’ll cover the most common causes:

If the devices are too far apart, they will not connect. bluetooth only has a range of a few meters.
if the headphones or earphones are about to run out, they may not connect. there may not be enough power to complete the connection.
if there is anything metallic or electrical in the path of the two devices, they may not connect. moving both devices will usually stop this problem.

If you can’t seem to identify the cause of the problem, please turn off the headphones or earphones and turn them on again. this will probably fix the problem.

conclusion

connecting jlab headphones and earphones to your iphone is not difficult. Simply switch them to pairing mode and find them in the “Bluetooth” list on the iPhone. the two will stay linked until you unpair them, either by plugging the earbuds into another device or physically pairing them again on the iphone.