JBL Tune 125TWS Manual | Step-by-Step User Guide 2021

In the world of technology, there is a large number of products, which can be used to improve our life at home or for personal and recreational use. Among the many products that are currently available, we have the earbuds , and here we have talked about some of them, as well as the skullcandy indy anc. In this article we are going to show you the user manual of one of these products, the jbl tune 125tws, as well as the correct way to use them in this new jbl tune 125tws manual >.

manual jbl tune 125tws | everything you need to know!

jbl tune 125tws manual – how to pair/pairing mode?

Step 1: Remove both earbuds from their charging case. by doing this they will automatically turn on and connect to each other.

step 2: activate the bluetooth pairing function on the device you want to pair with the headphones.

Step 3: From the list of available devices, find and select “jbl tune 125tws“.

Step 4: In case a code or pin is required for pairing, enter “0000“, “1111” or “1234”.

jbl tune 125tws manual – how to load?

To charge the jbl tune 125tws, all you have to do is place the earphones in their charging case and close it, so they start charging automatically. That said, the buttons can be charged while the case is connected to a power source, and charging takes around 2 hours.

jbl tune 125tws manual – controls

• turn on: press the physical button for 2 seconds.
• turn off: press the button button button for 5 seconds.
• play/pause music: press the physical button on the right earbud once.
• answer/end a call: press the physical button on the right earbud once.
• power on/off the microphone during a call: press the physical button on the right earbud for 2 seconds.
• activate siri, google assistant and bixby assistant : press the hard button on the right earphone twice.
• play next song: press the hard button on the left earphone once .
• play previous song: press the physical button ico in the left earphone twice.

controls in mono mode (using only one of the headphones)

• play/pause music: press the physical button once.
• answer/end a call: press the physical button once.
• turn the microphone on/off during a call: press the physical button for 2 seconds.
• activate siri, google assistant and bixby assistant: press the physical button twice.

jbl tune 125tws manual – how to connect it to pc?

step 1: turn on the pc.

Step 2: Turn on the headset and it will automatically enter pairing mode.

Step 3: On your computer, go to bluetooth settings and select “add bluetooth” or other devices.

Step 4: From the list of available bluetooth devices, select “jbl tune 125tws“, and then click done when connected.

While connected, “paired” appears under the product name in the computer’s bluetooth settings.

jbl tune 125tws manual: how to connect to iphone/ios?

Step 1: Remove both earbuds from their charging case. by doing this they will automatically turn on and connect to each other.

step 2: go to settings and then to bluetooth. activate bluetooth.

Step 3: Find “jbl tune 125tws” under “other devices” and tap it to connect.

Step 4: In case a code or pin is required for pairing, enter “0000“, “1111” or “1234”.

jbl tune 125tws manual: how to factory reset headphones?

step 1: connect the charging case to power.

Step 2: Put the earbuds into the charging case.

step 3: close the cover of the charging case for 5 seconds and then open the cover.

Step 4: On the charging case, press and hold the physical button on the earbuds for 30 seconds, then release.

Step 5: On the device that was previously connected to your product, go to the device’s bluetooth settings and remove or forget the headset from the device’s bluetooth memory.

Step 6: Reconnect your product to the device.

jbl tune 125tws manual: how to use it?

step 1: make sure you choose the ear tip that best fits your ear, so that the placement of the headphones is easier and more comfortable.

Step 2: Insert the earpiece so that the tip of your ear rests gently in the opening of your ear canal.

Step 3: Gently rotate the earpiece backwards until the tip of your ear creates a comfortable seal in your ear canal.

Step 4: After placing it in the ear opening, make sure the earphone is placed in a horizontal position.

Step 5: Repeat steps 1-4 to insert the other earbud.

troubleshooting and problems

jbl tune 125tws does not load

If the earbuds are not charging, look into the charging port on the charging case and blow or remove any possible dust that may be causing a problem; also look at the port for damage or looseness. if that’s not the case, make sure the earphones are placed correctly in the charging case.

jbl tune 125tws doesn’t match

The device to be connected may be in power saving or sleep mode and therefore the headphones will not connect. double check to make sure those modes are off.

jbl tune 125tws one side not working (left or right)

In case one of the two headphones does not work, the following can be done:

• check side balance.
• check if the headphones are in mono or stereo mode (only one of the headphones will work).
• reconnect bluetooth.
• reset the headset.

frequently asked questions

jbl tune 125tws – warnings

1. never disassemble or reassemble the product to avoid malfunction or fire hazard.
2. keep away from corrosive liquids to avoid product damage.
3. keep away from extreme environments temperatures below -10°c or above 60°c.
4. keep away from children and pets.
5. never touch the earphones with sharp objects, otherwise Otherwise, they will be easily scratched.
6. Do not use the product in stormy weather to avoid malfunction or electric shock.
7. If it has not been used for more than a month, please charge it and keep it in time to make sure it’s safe.

Hopefully now you know how to operate the earphone from the previous jbl tune 125tws manual. Do you want to know something about headphones? feel free to ask in the comments section.