How To Pair & Connect Phone On Jeep Wrangler Via Bluetooth?
Technology

How To Pair & Connect Phone On Jeep Wrangler Via Bluetooth?

Ever thought about how to sync a phone with a jeep wrangler? the uconnect system is unique to the jeep wrangler, but as with any technology, you may occasionally experience connectivity issues.

you can connect your phone to your jeep wrangler simply by activating bluetooth and touching your jeep model in the available devices tab. but sometimes it can be tricky.

Reading: How to connect bluetooth jeep wrangler

In this article, I’ll tell you how to pair your smartphone with your jeep, what to do when you have a connection problem, and everything else you might need to know.

how to connect your smartphone to jeep wrangler via bluetooth?

The procedure to connect your smartphone to your jeep wrangler via bluetooth is not complicated.

Follow these steps to pair your jeep wrangler phone:

  1. make sure your mobile device’s bluetooth is on and the car is stopped or parked.
  2. press the phone button on your jeep uconnect screen > add device > settings. your mobile device can now find the system, which can display a unique pin.
  3. select your jeep in the bluetooth menu of your mobile device. The two will begin to connect and the pairing request will be confirmed on your jeep uconnect screen.
  4. Bluetooth has been established between your mobile device and the jeep uconnect multimedia system.

why your phone may not connect to jeep wrangler?

When your jeep wrangler’s bluetooth connectivity fails, the first thing that comes to mind is the hassle of calling uconnect or jeep customer service. what is even scarier is having to take the equipment to a service center in case the problem is not solved.

Check out the following typical pitfalls and effective remedies before you panic and make calls. they could save you time.

Disconnection, even after successfully pairing the two devices, is one of the most common difficulties with bluetooth in general. there are a variety of reasons this occurs, including:

See Also:  How to Frame a Wall Corner - A Complete Guide

1. presence of interference:

many analog and digital sounds pervade our lives today, and even if they are not transferred wirelessly, they can leak and create interference. this is especially true because bluetooth works in unlicensed radio range.

the following are some of the most typical reasons for bluetooth connection problems:

  • usb 3.0 and wifi
  • 2.4ghz electronic devices

2. phone battery low:

your device and the infotainment system work together to help you get the most out of your jeep wrangler’s uconnect system thanks to bluetooth technology.

See also: Seven Ways to Improve Your Spiritual Health | Faculty and Staff Wellness

bluetooth, like data, can drain your device’s battery faster than usual. this is especially true when streaming music from your smartphone to your vehicle’s infotainment system.

When your phone detects that it is running low on battery power, it will normally go into power saving mode. this is especially true with newer smartphone models.

bluetooth normally turns off automatically in this mode to conserve power for more vital functions.

3. distance and obstruction:

It’s important to remember that bluetooth only works if you’re close to it. in order to find each other, the linked devices must be within 30 feet of each other.

however, in the presence of barriers, the practical distance decreases, so keep that in mind.

what to do when your phone won’t connect to jeep wrangler?

another issue you may run into is that your jeep wrangler doesn’t recognize or connect to the other device.

You may have trouble pairing both devices at the same time. the following are some options to solve the problem:

1. set to “detectable”:

Most of the time, your smartphone and jeep wrangler cannot discover each other because the bluetooth settings of one or both devices are not set to “discoverable”.

See Also:  How to Play SoundCloud on Alexa in Seconds - Robot Powered Home

simply go to your phone or uconnect bluetooth settings and change it to discoverable to solve the problem. Wait a few moments for the other device to detect the device that is in discoverable mode. if that’s the case, match!

2. clear bluetooth history:

Most of the time, you connect your device’s bluetooth to other bluetooth-enabled devices, just like you do with your browser and Wi-Fi network history.

As a result of “information overload”, your device may not be able to identify uconnect bluetooth.

See also: 4 Easy Ways to Remotely Print Over the Network or Internet

clearing or deleting bluetooth pairing history including uconnect is a simple solution. after that, try connecting the two units.

here’s how to link your device to your jeep wrangler’s uconnect system for your convenience:

  • turn on your smartphone and put your jeep wrangler in “park” mode.
  • activate bluetooth on your device and car.
  • find and press the “phone ” on your uconnect screen, then select “yes”.
  • In your device settings or options, go to bluetooth and see if it recognizes uconnect or wrangler. press to pair.
  • your wrangler’s uconnect display will show four digits, which will serve as the pairing pin.
  • enter the provided pin into your device and wait for it to pair successfully. .
  • If successful, it is best to bookmark your phone or device so that uconnect will quickly recognize it once you turn on bluetooth.

3. reboot your device:

Most issues with pairing or lack of recognition can be resolved by simply restarting your device. Wait a few moments after your device restarts before going to bluetooth settings. then pair it to your uconnect.

4. uconnect soft reset:

Your jeep’s uconnect system may not have been updated, causing bluetooth communication issues. soft reset will help the system to update quickly.

Turn on your car (in “park” mode) and your infotainment system while sitting comfortably on your jeep wrangler’s waterproof seat cover (check price on amazon).

See Also:  How To Set Up Your D-Link Cloud Router - D-Link BlogD-Link Blog

To turn off the infotainment screen, press and hold the top right corner of the screen until it turns off. this takes between 10 and 17 seconds on average.

Remove your finger from the screen once it has turned off and wait for the jeep logo to appear and then disappear.

The uconnect logo should display next, and it should say “subscription upgrade” and take you back to where you were before the reset. then try connecting the two devices again.

5. uconnect hard reset:

Just a heads up: Hard resetting your uconnect will restore all factory settings, which means any saved data such as navigation, pairing, and other personal settings will be lost and will need to be set up again. If you don’t think this will be a problem, you can continue with this approach by following these steps:

  • While your car is in run mode, press and hold the hot and cold buttons at the same time for about three to four seconds or until the “engineering menu” appears, where you can find various reset options.
  • scroll through the options and locate and press “restart to factory default” then press yes.
  • you can start setting everything up again as if you had a new uconnect system.

final words

If you made it this far in the article, you already know everything there is to know about how to pair a jeep wrangler phone, related problems and how to solve them.

If the methods to resolve jeep wrangler bluetooth difficulties don’t work, it’s time to contact jeep or uconnect customer service because the problem could be related to the device itself.

>

Related publications:

See also: Want to use your Cricut with a Chromebook? Yes! You can!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button