How To Pair Your Bluetooth Device with GMC IntelliLink - GMC Life
Technology

How To Pair Your Bluetooth Device with GMC IntelliLink – GMC Life

Please note: Depending on the model year, model, trim level, and available equipment installed on your GMC, Bluetooth availability and the pairing process may differ. always refer to your vehicle owner’s manual or visit support to find information that applies directly to your specific vehicle, or ask your gmc dealer for further assistance.

getting started before you grab the keys to your gmc, take a look at your phone. there are a few initial things you need to make sure are enabled for it to connect and interact with your vehicle’s intellilink system.

Reading: How to connect bluetooth gmc terrain

make sure your phone’s bluetooth connectivity is active; look for a taskbar icon or button/switch to indicate bluetooth is on.

Also, make sure your phone is “discoverable”, meaning it can be found and recognized by other bluetooth systems looking for devices to pair with.

See also: Pro Talk – How to Fuse Cakes Together – Mark&039s Fireworks

The exact process you need to follow for this process may differ depending on the type of phone and the software you use. Be sure to refer to your phone’s instruction manual if you have any questions.

intellilink with 7” color touch screen (available on gmc terrain)

You can pair your phone using voice commands or through the infotainment system’s physical controls.

to pair the phone using voice commands:

  • press the push-to-talk button on the screen and say “bluetooth”. the system will respond by saying “bluetooth ready”.
  • wait for the beep and then say “pair”.
  • the system will respond with “start a search on your bluetooth”. phone.”
  • Scan for possible bluetooth connections on your phone or device. select your vehicle from the available options.
  • you will be prompted to enter a 4-digit code, displayed on the screen, or confirm that a 6-digit code displayed on your phone matches one shown on the radio.
See Also:  LG TV - How to Screen Share | LG USA Support

See also: Can You Hookup Your RV Into House Electrical System?

to bind the phone through the radio screen:

  • on the controls located in the center of the instrument panel, just below the screen, press the “config” or “phone” button
  • using the control knob marked “menu , ” select “phone settings” on the screen.
  • select “pair device (phone)”.
  • the screen will prompt you to start a bluetooth search on your phone, and provide a four-digit pin.
  • start the pairing process on the cell phone.
  • locate and select the device with the vehicle make and model name on the phone follow the instructions on your cell phone to enter or confirm the pin shown on the vehicle screen.
  • if the phone prompts you to accept the connection or allow access/download of the phone book , select always accept or allow in order to use in-vehicle touch dialing.

intellilink with 7″ color touch screen (available in acadia, canyon and sierra) or intellilink with 8″ color touch screen (available in acadia, canyon, sierra and yukon)

You can pair your phone using voice commands or through the radio interface itself.

To pair a phone with voice commands:

  • press the push-to-talk button on the screen and say “bluetooth”. the system will respond by saying “bluetooth ready”.
  • wait for the beep and then say “pair”.
  • the system will respond with “start a search on your bluetooth phone”. .”
  • Scan for possible bluetooth connections on your phone or device. select your vehicle from the available options.
  • if your phone supports simple secure pairing (ssp), it will pair with the phone.
  • if your phone does not support ssp , you will be prompted to enter or confirm a code that will be displayed on the infotainment screen.
  • if the phone prompts you to accept the connection or allow access or download of the phone book, select “yes “, “always allow,” or “allow” to use in-vehicle touch dialing.
See Also:  Can You Hookup Your RV Into House Electrical System?

To link the phone through the infotainment display:

See also: How to Connect Wi-Fi Extender to Verizon Router? – RouterCtrl

  • press the “home” button
  • touch the “phone” screen icon or press the phone button
  • select the “search device” option on the touch screen menu.
  • select the device you want to pair from the touch screen menu. if it doesn’t appear, make sure bluetooth is enabled and the phone is discoverable.
  • if your phone supports simple secure pairing (ssp), it will pair with the phone.
  • if your phone does not support ssp, you will be prompted to enter or confirm a code which will be displayed on the infotainment screen.
  • if the phone prompts you to accept the connection or allow access or phone book download, select “yes”, “always allow” or “allow” to use in-vehicle contact dialling.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button