How to Install a Bathtub Drain Pipe | Rooter Guard
Technology

How to Install a Bathtub Drain Pipe | Rooter Guard

A bathtub drain pipe is an essential piece of bathroom hardware. It doesn’t matter if you’re installing a new tub or replacing an old one, you need to have a properly functioning drain. this is so that the water stays in the bathtub when someone wants to take a bath and the water also drains when they take a shower.

The purpose of a drain is to ensure that water flows out of the bathtub and through the pipes and plumbing in the house. Bathtub drains come in many varieties, with the most popular being the lever drain, which is the most versatile drain for any plumbing system. plunger and pop-up style drains fall into the category of trigger lever drains.

Reading: How to connect bathtub drain pipe

That said, the best thing you can do is install a bathtub drain that can accommodate various types of bathtub accessories. but leaks are also a problem that you should expect over time. and this is a problem that you should remedy as quickly as possible because it can cause serious water damage if left uncorrected.

So, whether you’re showing your property or putting it up for sale, making sure your bathtub drain works properly goes a long way. After all, no one wants to buy a house with a bathroom that breaks down after they move in. plus, it also shows responsibility on your part as a homeowner that you really cared about your home by maintaining it and fixing problems.

problematic bathtub drain pipes

But even if you’re not selling your home, it’s very important to pay attention to your bathtub’s drain pipes. the last thing you want as a homeowner are leaks that can get worse over time. To avoid such problems, regular maintenance and proper use of your bathtub should be practiced. for example, you can set rules about what to do immediately after someone uses the bathtub. it can be as simple as picking up visible hair and throwing it away instead of letting it fall down the drain.

See Also:  Discord Integrations | Integrate Discord with 750 Apps | Connect

the parts of a bathtub drain pipe

See also: BONAOK Q37 Wireless Microphone and HIFI Speaker User Manual – Manuals

The drain pipes of a bathtub are made up of the following:

  • the tee connection
  • the drain pipes leading to the main drain

That said, the actual tub drain and overflow pipe are also considered part of the drainage system. the type of drain pipe to consider when replacing current pipes and the tools used.

installation of a bathtub drain

Bathroom plumbing can seem daunting, but some related tasks, like installing a bathtub drain, aren’t all that difficult to accomplish. in fact, it is a project that you can do yourself; yes, it’s a simple and easy bathroom improvement project.

A bathtub drain is designed in such a way that the water flows to the lowest point of the pipe, which is known as a siphon. at this point the heavy sediment will settle while the rest of the water will travel further down the pipe. for some time, this will help keep your drain from getting clogged. however, there is a chance that the low point will corrode or produce a buildup that is difficult to remove. if this is the case, you should replace the bathroom drain.

Now that you know all that, here’s how to install a bathtub drain pipe:

  • Remove the tubes connecting the overflow to the tub drain basket. remove the overflow cover by turning the set screws on the cover plate. the way you remove the drain basket is by inserting a screwdriver into each side of the basket and then turning them counterclockwise.
  • remove the t-fitting located behind the tub. if it’s plastic, use tongue-and-groove pliers to loosen the union nuts.
See Also:  How to Connect a Soundbar to a Receiver

See also: How to print orders from Grubhub | Grubhub for Restaurants

Use two pipe wrenches if it’s metal. place one wrench on the pipe you don’t want to turn, while the other will connect to the pipe to be removed. turn the key into the tube to be removed while holding the other key stationary. if they don’t unscrew, use penetrating oil on the threads.

1. attach a pvc bathtub drain kit to the bathtub. both the top deck overflow plate and drain assembly are upgraded over the original. spread silicone on the joint and then use a screwdriver to tighten the plate. use a pair of screwdrivers to screw on the bathtub drain basket. Apply silicone to the joint where the pipe meets the basket and use tongue and groove pliers to tighten the fitting. then the tee fitting will be connected to the overflow tube and drain tube of the tub basket. use pliers to tighten the connection nuts.

2. if the original pipe is in good condition and not leaking, you can connect the drain pipe to the tee fitting. if it is a pvc fitting, there is a union nut screwed on, or the fitting is cemented with pvc cement. In case the pipes leading to the main drain are damaged, continue to the next step.

3. Remove the drain pipe that runs from the tub to the main drain. if it’s metal, unscrew it with two pipe wrenches. the first wrench will hold the joint tight in the area where the pipe connects and the second wrench will unscrew the pipe. In case the connection is PVC, cut about an inch of the pipe that is away from the drain with a hacksaw.

See Also:  How to Contact Your Spirit Guide | Spirituality & Health

4. use pvc and suitable connectors to replace the old pipe. all of these materials can be found at your local hardware store. additionally, you can get a pvc pipe that has the necessary threads to screw into metal pipe. be sure to wrap the threads with teflon tape or coat them with pipe compound before tightening the pvc pope. In case you are connecting PVC to PVC, put cement in the one inch cut piece that leads to the main drain. then use pvc to cut the rest of the pvc pieces to fit them together and cement them together.

See also: How to Connect Spotify to Tinder to Display Your Music Taste

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button