Babysense V24RUS Baby Monitor with Camera and Audio User Manual - Manuals
Technology

Babysense V24RUS Baby Monitor with Camera and Audio User Manual – Manuals

Babysense V24R_US Baby Monitor with Camera and Audio User Manual - Manuals+

Video Baby MonitorBabysense V24R_US Baby Monitor with Camera and Audio User Manual - Manuals+

Reading: How to connect babysense video monitor

user manualwireless digital video monitor for babieslook, listen and talk to your babymodel: v24r_us (video monitor for babies with one camera)v24r_2us (video surveillance for babies with two cameras)

warnings and safety instructions

Follow these safety precautions to prevent fire, injury, or product damage.

Read and Save Instructions: It is very important that you read all of the safety and operating instructions before operating the babysense video monitor. Please keep your purchase receipt as it will be required if warranty service is required.

important:

  • The babysense video monitor is a high-quality electronic device that should be handled with care: do not handle roughly, drop or throw it.
  • This product is intended for use only. indoor use.
  • water and moisture: the product should not be exposed to rain, moisture, dripping or splashing. never use or place the product in or near moisture or water.
  • This product is not a substitute for responsible adult supervision. your video monitor is designed to be an aid and should not be used as a substitute for proper and responsible adult supervision of a child.
  • power supply: This product should only be used with the manufacturer-supplied AC power adapters as included in this package.
  • Ventilation: This product should not be used on a bed, sofa , carpet, or similar surface that may block ventilation or speaker openings, or placed in an enclosed area, such as a bookcase or drawer, that may impede airflow. never cover the product with clothing, towels, blankets or any other items.
  • this product is not a toy and should be kept out of the reach of children.
  • caution: This product contains small parts. Take care when unpacking and assembling the product, and keep small parts out of the reach of children.
  • Strangulation hazard: Children can become entangled in cords. Make sure the baby unit, parent unit, and power adapter cords are out of reach of your baby and other small children at all times, at least 6 feet away. To avoid potential danger from power cords, cords should be secured and never hung over or near the crib. never place the baby unit or parent unit inside your baby’s crib, bed, or playpen.
  • choking hazard: keep all packing materials and protective sheets out of the reach of children.
  • keep away from heat sources: this unit should not be exposed to direct heat sources such as candles, stoves, radiators, heating vents or other appliances that emit heat. the unit should not be left in direct sunlight.
  • battery: Before using the product, we recommend that you fully charge the battery in the parent unit, so that it can continue working if you unplug it from the power source to take it to another location.
  • Installation location: The installation location plays an important role in ensuring proper operation. Therefore, please keep a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi-Fi routers, otherwise they may cause interference. if this occurs, move the parent and baby units to another location.
  • Damage Requiring Service: This product should be serviced only by qualified personnel.
  • do not try to open and repair the product. If you have any problem with the product, please contact your authorized dealer.
  • In case of unusual noises or odors coming from the device, immediately unplug the product from the power outlet and contact your authorized dealer.
  • if the product gets dirty, use a soft, slightly damp cloth to clean the surfaces, taking care not to get water into any of the openings.

Important: The babysense video monitor is designed only to listen to the baby’s voice and view the baby’s images. This product is not a medical device and should not be used as a substitute for responsible adult supervision. It’s important to regularly check on your baby in person.

1.1 Safety Instructions for the AC Power Adapter

    they can get hot to the touch. this is normal and should not be a concern.
  • check that the power cord and its plug are intact.
  • the adapter should be handled with care: do not handle it roughly, do not drop or pull.
  • once you remove the power adapter from the outlet, hold it and pull it out of the receptacle. do not pull or bend the cord as this will put additional stress on the cord and could cause damage.
  • do not touch the power adapter with wet hands or allow liquids to spill on it.
  • make sure the power adapter cords are out of the reach of your baby and other small children at all times. to avoid potential danger from power cords, cords should be secured and should never be hung on or near the crib.
  • do not replace the plugs or cord on your power adapter. This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package.
  • Never cut, damage, or bend the power cord.
  • Do not place any objects on top of the power cord, which could cause overheating, damage, inflammation and electrocution.
  • do not leave the power adapter connected to the power outlet when it is not connected to the baby unit or of the parents.

Warning:

  • Do not replace the power cord with non-genuine substitutes. improper connection may cause electric shock.
  • Do not place the AC adapter cord in a place of high wear. never use a frayed or damaged cord.
  • for indoor use only.

1.2 safety instructions for lithium ion battery

  • do not attempt to repair or adjust any of the unit’s electrical or mechanical functions.
  • do not disassemble, cut, open, crush, bend, puncture, or shred cells or batteries.
  • if the battery is leaking, do not allow battery fluid to come in contact with skin or eyes. If this happens, immediately flush affected areas with water and seek medical advice.
  • The battery should not be exposed to direct sunlight or heat sources such as candles, stoves, radiators, heat registers, or other sources of heat. . apparatus that emits heat.
  • do not modify, reconstruct, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. batteries can explode if damaged.
  • use only the battery supplied (built-in) with the product. improper use or use of unapproved batteries may present a risk of fire, explosion, or other hazard, and may void any approval or warranty.
  • if you believe the battery is damaged, remove the product from the charger and stop using the product. never use a damaged battery.
See Also:  How to Connect AirPods to an Apple TV

1.3 information on how to dispose of the battery and the product

  • Always dispose of the battery and product at the end of its useful life in an environmentally responsible manner and in accordance with local waste disposal requirements. All cardboard and paper packaging materials should be recycled in accordance with your local council’s waste regulations. Thank you for choosing the Babysense Video Monitor from Hisense Ltd.

fcc statements:

This device complies with part 15 of the FCC Rules. the operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – reorient or relocate the receiver antenna . – Increase the separation between the equipment and receiver. – connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/tv technician for help.

Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statements: This device complies with Industry Canada licence-exempt RSS Standards: Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

package content

  • parent unit x 1;
  • baby unit x 1; (2x on v24r_2us – dual camera monitor)
  • AC power adapter x 2; (x 3 in model v24r_2us – monitor with two cameras)
  • lithium-ion battery (pre-installed in the parent unit) x 1;
  • user manual x 1;
  • wall mount set x 1 (x 2 on v24r_2us – dual camera monitor)

product overview

3.1 Parent Unit overviewBabysense V24R_US Baby Monitor with Camera and Audio User Manual - Manuals+

summary of infant unit 3.2

Babysense V24R_US Baby Monitor with Camera and Audio User Manual - Manuals+

3.3 icon overview

See also: Connect 9 Dots with 4 Lines — Answer to the 4 Lines 9 Dots Puzzle

Babysense V24R_US Baby Monitor with Camera and Audio User Manual - Manuals+

operate the monitor

  • The baby unit should be placed at least 5 feet away from the baby’s crib on a flat surface. alternatively, it can be wall mounted.
  • never place the baby unit inside a cot, bed or playpen.
  • make sure the unit, cables and the power adapter are out of the reach of babies and other small children. To avoid risk of strangulation, power cords should be secured and should never be hung over or near the baby.
  • Place the baby monitor in a place where air can circulate freely and avoid blocking ventilation and vents. speaker openings.
  • Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, is free of dust, and is not in the line of sight to a strong light source or direct sunlight. avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.
  • To use the Parent Unit and Baby Unit together, you must be able to establish a radio link between them. the range will be affected by environmental conditions: – any large metal object such as a refrigerator, mirror, filing cabinet, metal doors or reinforced concrete between the baby and parent units can block the radio signal. – Signal strength can also be reduced by other solid structures, such as walls, or by radio or electrical equipment, such as televisions, computers, cordless or mobile phones, fluorescent lights, or dimmer switches. – use of other 2.4 ghz products such as wireless networks (wi-fi routers), bluetooth systems, or microwave ovens may cause interference with this product, therefore keep the baby monitor at least 5 feet (1 .5 m) from such products, or turn them off if they appear to be causing interference.

note: If you place the parent and baby units too close together, you will hear a high-pitched noise called “feedback”, this is normal. units are designed to be located in separate rooms.

4.1 turning on the baby unit

  • connect the power adapter of the baby unit (camera) to the DC jack on the back of the baby unit.
  • connect the AC power adapter to the wall socket power.
  • the unit will turn on automatically and the green led indicator will illuminate.
  • unplug the baby unit to turn it off.

Note: Please use only the AC power adapter included in this package.

4.2 Turning on the parent unit* Please use only the AC adapter included in this package.* The parent unit is supplied with a pre-installed rechargeable lithium-ion battery (3.7v 950mah). whenever possible, connect the parent unit to the adapter plugged into the mains, to keep the battery charged.

  • connect the plug of the adapter to the DC jack on the right side of the parent unit.
  • connect the AC adapter to the wall outlet.
  • keep pressed the power key on the top left of the parent unit’s keyboard.
  • once the parent unit is powered on, the power led indicator will turn on and the “babysense video” image will appear on the lcd screen.
See Also:  4 Ways To Connect An Audio Mixer to iPad - Kettner Creative

4.3 charging the parent unit

  • plug the power adapter into the parent unit;
  • plug the adapter into the wall outlet.
  • the charge indicator on the parent unit lights up. will illuminate red.
  • When the unit is powered on, the charging LED will illuminate red and the battery charge icon (changing bars) will appear in the upper right corner of the LCD screen.
  • it takes approximately 8 hours to fully charge the battery.
  • a full battery indicator (4 solid bars) will appear in the upper right corner of the LCD screen, indicating that the battery is fully charged .

Note: Before first use or after prolonged storage of the product, it is recommended to fully charge the battery of the parent unit before using the monitor.

osd (on screen display) mode operation

5.1 parent unit display on/off (audio only mode) press the power button ( 1) to turn on/off the lcd screen.

5.2 volume adjustment

  • press the up button (7) to increase the volume.
  • press the down button (9) to decrease the volume.

5.3 brightness adjustment

  • press the left button (11) to decrease the brightness.
  • press the right button (12) to increase the brightness.

5.4 scan mode: automatic switching between paired baby units

Note: This feature is only available when two or more cameras are paired. you can set the scan (loop) mode and each paired baby unit will be displayed on the screen for 10 seconds and then the screen will automatically switch to the next paired baby unit.

  • press and hold the camera switch button (13) to activate auto scan mode. A loop symbol will appear next to the camera number at the top of the LCD screen.
  • Press the camera switch button (13) to deactivate scan mode and manually switch to the next camera unit. matched baby.
  • li>

5.5 & pan/tilt

  • press and hold the ok/zoom button (6) for approx. 2 seconds to zoom in/out.
  • In zoom mode, press the left button (11), right button (12), up button (7) and down button (9) to pan/tilt the image.
  • During digital zoom mode, the zoom icon will be displayed at the top of the LCD screen. note: to adjust volume/brightness, please exit zoom mode first before operating.

5.6 talking to the baby

  • press and hold the talk button (5) on the parent unit to talk to your baby or partner in the nursery through the baby unit.
  • will appear a microphone icon at the bottom of the lcd screen while this feature is in use.
  • release the button when you finish talking.

note: While the “talk to baby” function is in use, there is no possibility to hear the sounds from the baby unit. releasing the talk key allows you to hear the sounds in the baby’s room again.

5.7 infrared night vision (automatic)

  • the infrared night vision function allows the camera to capture images of your baby or the monitored area in dark or low light conditions.
  • in this mode, only white colors will be seen and black. is displayed on the screen of the parent unit.
  • when the camera is in night vision mode, the icon will be displayed on the top of the lcd screen.
  • the image Up to 6 feet of distance between the baby unit and the object is optimal.

menu operation

6.1 Pairing the Baby Unit with the Parent Unit The Baby Unit is paired with the Parent Unit when delivered. no need to re-pair the units unless the baby unit loses link with the parent unit. To renew the pairing of your units or to pair a new/additional baby unit, please follow the procedure below:

Note: Before you begin pairing, make sure you have the Parent and Baby Units side by side and turned on.

  • press the menu/exit button (8) and the menu screen will be displayed on the parent unit.
  • press the button left button (11) or right button (12) until the pair is highlighted in red and then press ok (6) to confirm.
  • press the left button (11) or right button (12) to select the camera you want to link. press the ok button (6) to start pairing.
  • while the camera icon & the leds are flashing, press and hold the pairing button (26) on the back of the baby unit.
  • once paired, an image from the paired camera will be displayed on the screen.
  • if unsuccessful, repeat the above steps.
  • press the menu/exit button (8) to exit.

Note: If there is more than one camera to pair, repeat the above steps for each camera individually.

eco settings 6.2 this mode allows you to control the sound level from your baby’s room to automatically activate sound and video transmission on your parent unit. When using the echo function, the sound and video transmission will stop (standby mode) if the baby unit does not register any sound within 30 seconds. while in standby mode, the lcd screen turns off. once the baby unit registers a sound, higher than the set sensitivity level, it will automatically start transmitting the signal (sound and video) to the parent unit and the lcd screen will turn on.

See also: Anker SoundCore Speaker (A3102): Pair Your Device Via Bluetooth – shortmanual.com

note: the default eco setting is disabled in the supplied product.

To change the eco level, follow the instructions below:

  • press the menu/exit (8) button and the menu will be displayed on the parent unit.
  • press the button left button (11) or right button (12) until the echo icon appears strong>. highlighted in red and then press ok (6) to confirm.
  • press the left (11) or right button (12) to select the desired level (high, medium, low, off).
  • press ok (6) to confirm.
  • press the menu/exit button (8) to exit.

note: echo-low low sensitivity level: a higher sound level is required to reactivate transmission echo-medium medium sensitivity level: a medium sound level is required to reactivate transmission echo-high transmission high sensitivity level – low sound level required to wake up transmission outside of constant transmission – no standby.

Note: When the Eco function is activated, an Eco indicator will be displayed at the top of the LCD screen.Note: To view a video signal on the parent unit when the eco function is activated, short press the power key.

6.3 temperature unit setting

  • press the menu/exit (8) button and the menu screen will be displayed on the parent unit.
  • press left button (11) or right button (12) until the temperature icon is highlighted on and then press ok (6) to confirm.
  • press the left button (11) or right button (12) to select between c˚ or f˚.
  • press ok (6) to confirm.
  • press the menu/exit button (8) to exit.

note 1: the temperature indicator will be displayed at the top of the lcd screen.note 2: the default temperature setting is f˚ ( fahrenheit).Note 3: The monitor has a built-in automatic temperature alarm. The monitor will alert (visual indication) when the temperature in the baby’s room is too high (90°F and above) or too low (55°F and below). this feature cannot be adjusted.

6.4 lullaby and white noise settings

You can lull your baby to sleep by playing 4 pre-programmed lullabies from the baby unit. this function is controlled remotely from the parent unit.

press the menu/exit button (8) and the menu screen will be displayed on the parent unit.

  • press the left button (11) or the right button (12) until play the lullaby. icon is highlighted in red and then press ok (6) to confirm.
  • press the left button (11) or right (12) button to select the desired melody (1-4), a loop mode or a white noise sound.
  • press ok (6) to confirm.
  • press the menu/exit button > (8) to exit.
  • to stop playing the lullaby, go to the “lullaby settings” menu and select off icon.

note 1: once the lullaby function is activated, the lullaby icon will be displayed on the top of the lcd screen.note 2: the default lullaby setting is off .note 3: when lullabies are played in loop mode, only the 4 melodies are available; white noise is not played in loop mode.

night light 6.5

This monitor has a night light built into the baby unit, allowing you to remotely activate a comforting glow in the baby’s room.

  • press the menu/exit (8) button and the menu screen will be displayed on the parent unit.
  • press left button (11) or right button (12) until the night light icon is highlighted in red and then press ok (6) to confirm.
  • to activate the night light press the left button (11) or right button (12) to select the night light on. press ok (6) to confirm.
  • to deactivate the night light press the left button (11 ) or the right button (12) to select the night light off. press ok (6) to confirm.
  • press the menu/exit (8) button to exit.

note: the night light function can also be activated manually on the baby unit. briefly press the pairing button (26) on the back of the baby unit. press again to deactivate.

maintenance

  • all of the following maintenance procedures should be performed when the parent and baby units are not plugged into the wall outlet.
  • clean the surfaces of the parent and baby units with a soft, fluffy cloth. free cloth.
  • never use cleaning agents or solvents.
  • if the units become dirty, use a slightly damp cloth to clean the surfaces, taking care not to get water on any of the surfaces. of the openings.

customer service

If you’re having trouble setting up or using this product, you’ll find helpful tips and information in the troubleshooting section of this user guide. If you have further questions about the use of the product after reviewing the resources above, or would like to purchase replacement parts or accessories, please contact your local dealer.

Important: Please keep your purchase receipt and attach it to the last page of this user guide as it will be required if you require warranty service.

warranty terms

We take quality very seriously. That’s why all of our products come with a one-year warranty from the date of original purchase against defects in workmanship and materials. If you have warranty or support issues, please contact our customer service: [email protected]

troubleshooting

possible causes

• restart the baby unit (unplug the power adapter from the wall outlet, wait about 5 seconds and plug it back in). • reset the parent unit by opening the battery compartment and disconnecting the battery. wait 30 seconds and then reconnect the battery.

• In a quiet environment around the Parent Unit, turn down the volume of the Parent Unit to level 3 or less. • in a noisy environment around the parent unit, increase the volume of the parent unit to the maximum level.

technical data

If you have any product related questions, please contact us at [email protected] or toll free (833) 568-2229www.babysensellc.com v.int.ug.01.v24rus-us_2.12.19

See also: Linksys Official Support

documents / resources

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button