AJAZZ K870T Bluetooth Dual-Mode Mechanical Keyboard User Manual – Manuals
K870T Bluetooth Dual-Mode Mechanical Keyboard User Manual
brand of the product. ajazz product model: k870t battery capacity: 2000mah rechargeable lithium battery interface type: type c transmission method: wired usb and broadcom bluetooth 5.0 product size 362x134x34 5mm +0 5 product weight. 880g+10g cable: 1.6m braided cable Anti-ghosting: Wired mode supports unhurried full-key backlighting: RGB light keyboard layout (18 kinds of lighting effects). 87 key compact system requirements: windowsxp/windows 7/8/10/mac
the key function
ft=decrease screen brightness f2=increase screen brightness f3=show all desktops where all programs have been run f4=open main control panel f7=previous song f8=play/pause f9 =next song f10=mute f11= volume – f12=volume +
key combination function
fn+f5=previous song fn +f9=my computer fn+ f6=play pause fn+ f10=calculator fn+f7=next song fn+ f11=home page fn+ f8=mute fn+ft2=search
system switch fn+s = system switch win fn+a = system switch mac
wired mode: the keyboard can be used by connecting the data cable, pressing the button switch wired and bluetooth mode when the button light is off for wired use modewireless mode: When the bottom switch is in the on state, the wired and bluetooth switch mode button lights up blue, and the keyboard is in bluetooth mode. the first use must be paired before a wired keyboard can be used normally, then press the mode switch key to switch to wireless bluetooth mode
when using bluetooth mode, when the keyboard power is low, the fn key backlight keeps flashing to indicate charging, pay attention to the voltage to 5v, 1a current can also be directly connected to the computer to charge, and the red light in the upper left corner of the keyboard indicates when charging, the light is always on, completely off
bluetooth and amp; sleep mode
This product does not work for 5 minutes when it is in bluetooth mode, the keyboard backlight automatically turns off, it does not work for 30 minutes, and the keyboard enters standby mode and disconnects from the bluetooth device, you only need to touch any key to activate the keyboard
hours of work
In bluetooth mode, the battery life is about 8 hours when the backlight is on and the battery life is about 100 hours without the backlight. charging time approximately 4 hours 200 hours standby time
charge key box indicator -blue light 1nd1cator charging -red light
- the function of the left button is bluetooth mode when the light is on and blue, and the wired mode when the light is off
- the function of the middle button is: when the light is blue, the function of the wheel is to adjust the brightness of the light, and when the light is off, the function of the wheel is to adjust the volume
hot swap switch
You can replace different switches, customize the tactile and auditory response you want, and the triangle shaft seat is compatible with most mechanical switches
insert and extract steps
- Pull out the keycap with a key puller
- Pull out the switch with the shaft puller
- Proofread the pins and holes
- Press the switch vertically
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device. , pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirements. the device can be used in portable exposure conditions without restrictions.