➤How to connect AirPods to Huawei 🕹

➤How to connect AirPods to Huawei 🕹

how to pair airpods with huawei

➤How to connect AirPods to Huawei 🕹

as just mentioned, the connection between airpods and huawei devices is via bluetooth. This means that if you want to find out how to connect airpods to huawei, all you have to do is turn on your smartphone or tablet, launch the settings app (the one with the gear icon) and go to the bluetooth section of the menu that opens.

Reading: How to connect airpods to huawei

now, make sure the switch next to the bluetooth item is on (if not, turn it on to enable bluetooth), then open the case of your airpods and hold down the key on the back of the latter, until the led starts to flash intermittently.

When this happens, wait a few moments and touch the first airpods name that appears at the bottom of the smartphone menu and then the pair button that appears. Shown below: If all goes well, in a few seconds, the AirPods and Huawei will “see” and the pairing between the two devices will be completed. You can check the correct result of the procedure from the appearance of the name of the airpods in the associated devices section of the android bluetooth menu.

If this is not successful, please try to repeat the whole procedure by closing and reopening the airpods case and rebooting your huawei device. also check that the two devices are close enough to each other.

once connected, to verify that the airpods have permission to play the audio coming from your smartphone or tablet and to make calls, go back to the settings> menu; bluetooth, reward the ‘icona dell’ingranaggio located on the name of the airpods and, if necessary, activate the levers related to call from audio and multimedia audio (the headphones must be turned on, so with the cover open or out of it).

From the same screen, if you wish, you can also change the name of the airpods, by pressing the appropriate item and typing the name you want to assign to the headphones in the corresponding field.

how to use airpods with huawei

mission accomplished! You have now paired the AirPods with your Huawei device and are ready to use them for music, calls and more. What? I’ll explain it to you right away.

See Also:  5 Ways to Fix PS4 That Won't Connect to Wi-Fi

how to activate airpods on huawei

➤How to connect AirPods to Huawei 🕹

Once paired, unless you connect the AirPods to other devices, the earbuds will “remember” your Huawei smartphone/tablet and automatically connect (if within its range) as soon as you take them out of the case and use them.

See also: Roku AirPlay: How to Screen Mirror Your iPhone, iPad, Mac

if not, you will have to open the case of the airpods, go back to the settings> menu; bluetooth of your huawei device and select the headset name, to establish a new connection.

just like on the iphone, you can use your airpods both pair and individually, simply by wearing them. if you use one and then after a while also use the other, audio playback will automatically switch between mono on one earbud and stereo on both airpods.

If, for some reason, despite using the AirPods and selecting them in the settings> android bluetooth these should not be used by your huawei device for music playback and/or calls, proceed this way.

  • go to the menu settings> android bluetooth, select the icon dell’ingranaggio located on the name of the airpods and, if necessary, activate the toggles related to call audio and multimedia audio.
  • if you are playing multimedia content on your smartphone or tablet but the audio is not heard through airpods , open the android notifications menu (swipe down from the top of the screen), tap the current audio output device box, and select the airpods activate the menu if you press.
  • if you are making a call but the airpods are not used as a device to listen to incoming audio and broadcast outgoing , go to the dialer (l’app phone) during the conversation, touch the icon located at the bottom right (could be a speaker, a headset or the bluetooth symbol) and select the airpods give the menu check if you press it.

by setting your airpods as your default audio input/output device, you can also use them to interact with google assistant, alexa or other assistants of voice. strong> in use on your huawei device.

I also note that if you have airpods pro, you can switch between noise cancellation mode to transparency (where external noises pass through earphones) by simply squeezing the end of one of the airpods for a moment (there are no on-screen controls).

See Also:  A medium reveals how to communicate with spirits | WellGood

at the end of music playback or call, you can put the airpods in their charging case and close the latter: in a few moments, the earphones will automatically disconnect from the smartphone (or tablet).

Unfortunately, unlike on the iPhone, removing the earbuds from your ear will not automatically pause media playback, nor will it automatically resume using an airpod again: you have to pause and resume playback manually, through the on-screen controls.

Alternatively, you can use parts of third-party applications that allow you to activate these functions, such as the one I will tell you about in the chapter dedicated to checking the battery of airpods.

how to adjust airpods volume on huawei

➤How to connect AirPods to Huawei 🕹

if you wonder how to adjust the volume of the airpods on huawei, you should know that you can do everything normally, acting through the on-screen controls or volume keys device, just like any pair of headphones or earphones.

See also: How to Connect a Bluetooth Speaker to PS4 Since You Can’t Wirelessly

To be precise, by pressing the volume + and volume – keys on the device (normally located on the right side of the device), you can raise and lower the volume played to through the airpods (if they are in use). then by pressing the icon dell’ingranaggio found on the support of the on-screen adjustment bar, you can access the android audio settings panel.

via the panel in question, you can separately adjust the volumes for media applications, ring, wake-up calls and calls. For more details, please read my guide on how to adjust volume on airpods.

how to check airpods battery on huawei

➤How to connect AirPods to Huawei 🕹

on iphone, if you open the airpods charging case near the smartphone, a box appears on the smartphone screen showing the charge level of both the earphones and the case. then you can find the same information in the ios battery widget.

Unfortunately this does not happen on Android, but there are some third-party applications that allow these deficiencies to be made up (although less precisely than on the iPhone and with a small “weight” on the autonomy of the smartphone/ tablet in use), for example andropods, which you can find both in the play store and in alternative stores for huawei devices without google services.

See Also:  Philips Universal Remote codes Programming Instructions

andropods is an application that allows you to view the charging status of individual airpods and the charging case, both automatically, when you open the case near the smartphone/tablet in use, and manually, from the notification center of android. It also includes advanced features, such as those that allow you to automatically pause or resume playback when you remove or replace the airpods in your ears, but these require in-app purchases (from €3.39) .

That said, let’s see how the application works. once andropods is installed, you must start the application and grant it all the necessary permissions for it to work: therefore, click on the show overlays button and activate the toggle relative to write to other applications present on the screen that opens (so that it is possible to display the pop-up window with the charging status of the airpods); then press the rental button and consent to the use of location when the application is in use. finally, press the ⋮ button located at the top right, select the item ignore battery optimization from the menu that opens, set the option all apps to the don’t allow drop-down menu, tap the andropods icon and check the don’t allow option (not to automatically close the power saving app).

in conclusion, go back to the andropods main screen and activate the activate service toggle, to activate the app and see the charge level of the airpods and its case. by scrolling the screen, you can also unlock paid features, such as dedicated voice assistant, snapping and auto-shooting media playback when remove or using airpods.

how to disassociate airpods from huawei

➤How to connect AirPods to Huawei 🕹

If for one reason or another you decide to unpair the airpods from your huawei device, you should know that you can do it very easily.

To do this, go to the settings> android bluetooth, press the icona dell’ingranaggio located in the name of the airpods, awarded dissociate and that’s it .

See also: DIY: How To Install A Wood Burning Stove

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button