How to Put JBL Flip 4 in Pairing Mode - Tom&039s Tek Stop
Technology

How to Put JBL Flip 4 in Pairing Mode – Tom&039s Tek Stop

To pair the jbl flip 4 speaker with a bluetooth source device for the first time, or to review the connection information stored on that device, you need to know how to put the speaker into pairing mode. In this mode, the JBL Flip 4 transmits its Bluetooth name and current connection data over the BT airwaves. That’s why in this post, we show you how to put the JBL Flip 4 speaker into pairing mode, so you can connect it to phones, tablets, computers, and smart speakers.

how to put jbl flip 4 speaker in pairing mode

1. turn on cover 4

First, turn on the speaker by quickly pressing its power button.

Reading: How to connect a flip 4

See also: A Step-By-Step Guide On How To Pair Bose Bluetooth Headphones – Here One

see this button, circled in green, in the image below.

Picture of the JBL Flip 4 speaker turned OFF, with its Power button circled.

JBL Flip 4 speaker turned OFF, with its Power button circled.

The speaker then comes on, as pictured next.

Top view of the speaker, powered ON. How to Put JBL Flip 4 in Pairing Mode.

Top view of the speaker speaker, powered ON.

2. Press the Pairing / Discovery Mode Button for Two to Three Seconds

See also: How to Download MetaTrader 4 | MetaTrader 4 Requirements | FOREX.com

Second, in order to find your speaker on your source bluetooth device, put it into pairing mode. then, for that, press and release the pairing button, as shown in a circle in the following image.

Picture of the speaker's Pairing button highlighted.

The speaker’s Pairing button highlighted.

When you press this Pairing button, the speaker makes a plucking guitar pairing sound. Plus, the Power button lamp starts rapidly flashing blue. E.g. See this in the last picture, pointed at by the yellow arrow.

See Also:  Linking Data Between Multiple Google Sheets: Ultimate Guide

Picture of the speaker in Bluetooth discovery mode. Showing the Power button, flashing blue, highlighted with the yellow arrow. How to Put JBL Flip 4 in Pairing Mode.

The speaker in Bluetooth discovery mode. Showing the Power button, flashing blue, highlighted with the yellow arrow.

3. Done with How to Put JBL Flip 4 Bluetooth Speaker into Pairing Mode

Finally, while the power button is flashing, you should be able to see your jbl flip 4 on any phone, computer, tablet or smart speaker within range, several feet away from you. it, as shown below. eg our speaker here is called “tom’s flip 4”, although if you haven’t renamed yours, it will appear as “jbl flip 4”.

See also: How to Quickly Set Up a Dymo Label Printer on a Mac – The Seller Journal

Screenshot of the iOS Bluetooth Settings screen, showing -Tom's Flip 4- speaker discovered but not paired yet highlighted.

iOS Bluetooth Settings screen, showing -Tom’s Flip 4- speaker discovered but not paired yet highlighted.

Other Posts About the JBL Flip 4 Bluetooth Speaker

  1. jbl flip 4 buttons, codes combinations functions
  2. how to connect jbl flip 4 to iphone
  3. jbl flip 4 bluetooth pairing instructions
  4. how to charge jbl flip 4 wireless bluetooth speakers
  5. charge jbl flip 4 time, how long for full charge

posts related to how to put jbl flip 4 speaker in pairing mode

  1. how to put jbl charge 4 in pairing mode
  2. how to put ultimate ear wonderboom in pairing mode
  3. put jbl xtreme in pairing mode, xtreme 1
  4. how to put jbl clip 2 in pairing mode
  5. flip 3 jbl how to put it in pairing mode

references on how to put jbl flip 4 in pairing mode

  1. jbl flip 4 portable speaker official product page on jbl.com

revision history

  • 2020-08-15: first published.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button